Results 1 to 2 of 2

Thread: Yeastar TG-100 4G Gateway connection.

  1. #1

    Default Yeastar TG-100 4G Gateway connection.

    I have purchased a Yeastar TG-100 4G Gateway and set it up with a local SIM.

    I have set it up as a VoIP Carrier using the wizard. I have connected it to a line. I have set incoming calls to go to the autoattendant. It can receive a phone call and answer it. It then goes engaged and disconnects. If I dial the extension given to it by the wizard, I get the autoattendant. If I set it up to handle calls, the do not go through. Thus, I cannot receive or make calls over it. Help!

    Any suggestions gratefully received.

  2. #2

    Default Problem Solved:

    My problem in making outbound calls was that I had a different account name in my Epygi extension. Once that was sorted I could make calls out. Because I had put 00 into the hotline entry in the outbound route on the TG100, it was then trying to ring that number and got through to a local mobile service message that the number was invalid. Once the hotline entry was cleared, I was able to make calls.

    The problem with incoming calls was that there was already an Account1 route on the TG100 and this was taking precedence. Once I deleted that, calls came through to the extension on the PBX and by diverting any calls to that extension to the auto-attendant using Caller ID Services in User Settings for the extension, it all behaved flawlessly.

    Calls came in and I could make calls out.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. urgent issue with Ip connection and peak connection message
    By zet in forum Troubleshooting and Problems
    Replies: 0
    Last Post: 09-09-2013, 11:28 PM
  2. Ip connection cannot be accomplished
    By serviplexSIP in forum Troubleshooting and Problems
    Replies: 8
    Last Post: 01-19-2010, 05:22 PM
  3. 100/full wan interface.
    By paulk in forum Suggestions and Feedback
    Replies: 4
    Last Post: 07-24-2008, 02:19 PM
  4. Quadro4x96i supporting 100 extensions
    By Internet in forum Suggestions and Feedback
    Replies: 6
    Last Post: 06-27-2007, 03:26 AM
  5. Quadro with video phones (AuPix AP-100)
    By Totalcomsol in forum Hardware Interoperability
    Replies: 2
    Last Post: 10-09-2006, 04:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts