Results 1 to 2 of 2

Thread: Accessing the LAN side through OpenVPN

  1. #1

    Default Accessing the LAN side through OpenVPN

    I have set up my OpenVPN server:
    Server Configuration
    Enable OpenVPN Server
    Listening Port: 1194
    Protocol: UDP
    Device: TUN
    Virtual Network: 192.168.30.0 / 24
    Dynamic IP Address Pool: from 192.168.30.240 to 192.168.30.254
    Keep Alive: 10
    Timeout: 60
    Duplicate-CN Ticked
    Client-to-Client Not ticked
    Push Route to LAN side Not ticked

    My client is configured as:
    Common Name: [Name concealed but unique]
    Server IP/Host: [the WAN IP of my fixed IP Quadro]
    Server Port: 1194
    Protocol: UDP
    Device: TUN
    Static IP Address: Blank
    Route all traffic through the tunnel - Blank
    Ignore Push Routes - Blank

    Using my iPhone on the Mobile network, I can connect to the OpenVPN and can log into the Quadro using its LAN address. However, I cannot see any other network addresses on the LAN side. Help!

  2. #2

    Default

    Problem solved. My home IP range is 192.168.10.0 / 24 and for some reason this must have been a conflict with the virtual network of 192.168.30.0 / 24. When I changed the virtual network to a range in the 10.0.X.X series, it all worked. It would help if the documentation gave some guidance on this.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Connecting Snom phone to QX200 via OpenVPN
    By NSpinuzzi in forum 'How Do I' Questions
    Replies: 4
    Last Post: 06-03-2019, 03:22 AM
  2. Quadro2xi -can´t hear the listener of the other side
    By kubick in forum Troubleshooting and Problems
    Replies: 2
    Last Post: 02-25-2011, 03:39 AM
  3. Watched Extension mode - side effect.
    By ccomley in forum 'How Do I' Questions
    Replies: 12
    Last Post: 10-01-2008, 09:18 AM
  4. How to access a file server from the LAN side
    By max.siegrist in forum 'How Do I' Questions
    Replies: 3
    Last Post: 03-07-2008, 01:07 AM
  5. accessing Quadro 16X remotely
    By Lionel in forum Troubleshooting and Problems
    Replies: 2
    Last Post: 02-28-2007, 06:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •