Results 1 to 2 of 2

Thread: Internet speed

  1. #1

    Default Internet speed

    Have been told by my ISP that the Quadro is the possible cause of slow speed and want to try and diagnose the issue.
    Am using a Quadro 2x2, old I know but suffices for the purpose of the company.

    Firstly when I run network diagnostic it fails with the below system error log
    Jul 2 11:36:57 quadro daemon.info klogd: device eth1 left promiscuous mode
    Jul 2 11:36:57 quadro daemon.warn klogd: NF_IP_ASSERT: ip_nat_core.c:939(ip_nat_setup_info)
    Jul 2 11:36:57 quadro user.info cgimains.cgi[1556]: buffer lenght = 208

    No idea what that means but what else should I be doing??
    The quadro acts as the router but obviously was thinking of putting another router between the quadro and modem but that would take time and a lot of changing settings I assume..

    THanks

  2. #2

    Default

    the wan port of the quadro is usually set to 100 mb half duplex or 10 mb half or full duplex. If you have an internet connection that is better than 10/10 mb up and down, you will need to place a router that has 1000/1000 or 100/100 mb wan / lan ethernet interfaces.

    or you could upgrade from a quadro to a qx.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Quadro2xi internet speed problems
    By sebastjan_b in forum General Discussions
    Replies: 1
    Last Post: 12-20-2010, 04:22 AM
  2. How to Configure international calling via Internet
    By IBIS_SOEN in forum 'How Do I' Questions
    Replies: 1
    Last Post: 11-04-2010, 10:56 PM
  3. some internet sites seem blocked
    By paulk in forum Troubleshooting and Problems
    Replies: 5
    Last Post: 01-22-2009, 08:12 AM
  4. Cant connect Internet Voip provider
    By swenz in forum Troubleshooting and Problems
    Replies: 6
    Last Post: 06-25-2008, 02:05 PM
  5. Update firmware by Internet
    By Amper in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 04-22-2008, 02:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •