Results 1 to 3 of 3

Thread: Epygi QUADRO-ISDN Trunk status Zabbix monitoring

  1. #1

    Default Epygi QUADRO-ISDN Trunk status Zabbix monitoring

    I have Epygi QUADRO-ISDN 5.0.11 and want to monitor Quadro Status - Hardware Status with Zabbix

    I manage to implement SMTP on Epgyi and on Zabbix, but i dont know how to monitor this part (4 Trunks and their status.) Quadro Status - Hardware Status



    Sometimes people cannot dial into the company on their main number. The line appears esentially dead. At this point I can access the Quadro via the web interface and SYSTEM -> STATUS -> Hardware shows the 4 used ISDN Trunks as..

    link - 1 is up, synchronization down
    link - 2 is up, synchronization down
    link - 3 is up, synchronization down
    link - 4 is up, synchronization down

    I then have to restart the trunks and everything is fine within the office.
    Thanks

  2. #2

    Default

    On the ISDN, You need to set layer 2 as permanently up or the channels go to sleep.... common problem with isdn.

  3. #3

    Default

    Thank you for answering mate.

    Do you know, is there an SNMP Trap that will return Quadro Status values as i posted on picture?
    What do i need to query to get these results?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Incorrect interface status when monitoring QuadroFXO using SNMP
    By emlchem in forum Troubleshooting and Problems
    Replies: 2
    Last Post: 05-27-2013, 05:36 PM
  2. Routage des SDA depuis un trunk ISDN (Résolu)
    By si_systerel in forum Français
    Replies: 4
    Last Post: 08-02-2012, 08:52 AM
  3. SNMP Status of ISDN/BRI Lines
    By sweni in forum 'How Do I' Questions
    Replies: 1
    Last Post: 05-18-2012, 06:53 AM
  4. Multi Trunk call forwarding Quadro ISDN
    By mcamargo in forum 'How Do I' Questions
    Replies: 3
    Last Post: 10-26-2010, 05:15 PM
  5. Quadro Epygi ISDN Gateway BER Test
    By kellymartin244 in forum 'How Do I' Questions
    Replies: 0
    Last Post: 10-05-2010, 05:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •