Results 1 to 2 of 2

Thread: Can only partially provision polycom ip331

  1. #1

    Default Can only partially provision polycom ip331

    Help! I've set up an ftp server to provision the Polycom IP331s, the FTP log shows that the phones download the (mac-address).cfg and sip.ld files and then upload their log file. Then the process stops, the phones don't download the 102.cfg file listed in the (mac-address).cfg file.

    I've checked (mac-address).cfg with an XML editor and it does not show any errors. I've also manually ftp'd the 102.cfg file to check that it can be downloaded.

    Any help would be appreciated. All the details are shown below. The real mac address has been replaced with (mac-address) and open chevrons with open parenthesis.


    FTP Transfer Log
    Mon Jun 29 17:32:06 2015 1 620 /tftpboot/(mac-address).cfg b _ o r PlcmSplp ftp 0 * c
    Mon Jun 29 17:32:06 2015 1 48180 /tftpboot/sip.ld b _ o r PlcmSplp ftp 0 * i
    Mon Jun 29 17:32:13 2015 1 0 /tftpboot/(mac-address)-boot.log b _ i r PlcmSplp ftp 0 * i

    (?xml version="1.0" standalone="yes"?)
    (!-- Default Master SIP Configuration File-->
    (!-- For information on configuring Polycom VoIP phones please refer to the -->
    (!-- Configuration File Management white paper available from: -->
    (!-- $RCSfile$ $Revision: 155255 $ -->

    Uploaded Phone Log File
    0101000021|copy |3|00|'ftp://PlcmSplp:****@3232248380/(mac-address).cfg' from '3232248380'
    0101000021|copy |3|00|Download of '(mac-address).cfg' succeeded on attempt 1 (addr 1 of 1)
    0101000022|copy |3|00|'ftp://PlcmSplp:****@3232248380/sip.ld' from '3232248380'
    0101000022|cfg |3|00|Image sip.ld has not changed
    0101000022|copy |3|00|buffered_write: transfer terminated
    0101000022|copy |3|00|Download of 'sip.ld' succeeded on attempt 1 (addr 1 of 1)
    0101000022|cfg |3|00|Downloaded application image is identical to current version
    0101000022|cfg |3|00|Phone successfully provisioned
    0101000022|app1 |3|00|Application, load: Type=SIP, Version= 02-Nov-11 13:18
    0101000029|app1 |4|00|Loaded application sip.ld successfully, errors 0x20.
    0101000029|app1 |6|00|Uploading boot log, time is MON JAN 01 00:00:29 2007

    Phone Information
    Phone Model SoundPoint IP 331
    Part Number 2345-12365-001 Rev. 1
    MAC Address (mac-address)
    IP Address
    SIP Software Version
    BootROM Software Version

  2. #2


    I fail to see why you need Epygi assistance when it looks like you need Polycom assistance

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How can I provision Snom M9r bases and phones on a M8L via WAN?
    By apartida in forum 'How Do I' Questions
    Replies: 0
    Last Post: 02-11-2014, 12:52 PM
  2. Auto Provision Snom phones using DNS hostname as registra
    By woods in forum 'How Do I' Questions
    Replies: 8
    Last Post: 02-26-2012, 01:49 AM
  3. Auto provision remote SNOM as local extension
    By matrix in forum 'How Do I' Questions
    Replies: 2
    Last Post: 03-01-2010, 04:10 AM
  4. Use built-in TFTP server to provision "Other" phones
    By mobidutch in forum Suggestions and Feedback
    Replies: 3
    Last Post: 03-18-2008, 09:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts