Results 1 to 4 of 4

Thread: "This account number is not valid"

  1. #1

    Exclamation "This account number is not valid"

    I am having trouble making calls out of the Quadro 2x2, any call that I make it give the error "This account number is not valid"

    I have a SIP number registered on the Quadro which I setup via the VoIP carrier wizard and I am managing all the outgoing calls via the CRT. All incoming calls work without any issues.

    I have used the same SIP account on a standalone phone and it works perfectly. What I suspect is that there is something that the SIP server is not liking from the Quadro and it is rejecting the calls.

    The debug of the SIP packets are below.

    The call is being made from a remotely connected extension 704 and the IP starting with 203 is the Public IP of the internet connected to the Epygi (NATted through a router) and the number starting with 0450 is the number I am calling. The SIP server is 203.160.8.75 (ISPhone)

    Note: This is the same issue with local extensions as well.

    Max-Forwards: 70
    Content-Length: 260

    v=0
    o=- 309 766 IN IP4 203.***
    s=-
    c=IN IP4 203.***
    t=0 0
    m=audio 6030 RTP/AVP 0 8 18 101
    a=ptime:20
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    ***************************** SIP message buffer end ******************************

    16:10:51 Cl3wh::TUMsgProc # Start timer for DNS SRV fail-over, msg type: 51, state: State_Empty # DID: 2463 # TID: 2464
    16:10:51 Receive SIP message # (30/10/2014 05:10:51:311 GMT) # UDP # 423 bytes # buff size 1 # from: 203.160.8.75:5060 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    SIP/2.0 100 Trying
    Via: SIP/2.0/UDP 203.***:5060;rport=5060;branch=z9hG4bKEPSVBUS828b9 0c4-8322-4dee-9ff9-9bb72628f547
    To: <sip:0450***@sip.integraphone.com.au>
    From: "Remote - x704"<sip:61755361002@sip.integraphone.com.au>;tag =1414470434336225fc-9d6d-41ca-b354-fafd3b6d1680
    Call-ID: 23019766281195695_c6903d0d-5b0a-4efe...ygi-config.com
    CSeq: 180 INVITE
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:10:51 TLayer::MsgToTU # Msg type: 100 # TID: 2464 # DID: 2463
    16:10:51 SipSessDlg::Inc1xxProc # Got 100 message # OID: 2463 # SID: 23019766281195695
    16:10:51 Receive SIP message # (30/10/2014 05:10:51:417 GMT) # UDP # 806 bytes # buff size 1 # from: 203.160.8.75:5060 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    SIP/2.0 183 Session Progress
    Via: SIP/2.0/UDP 203.***:5060;rport=5060;branch=z9hG4bKEPSVBUS828b9 0c4-8322-4dee-9ff9-9bb72628f547
    Record-Route: <sip:203.160.8.75;lr>
    To: <sip:0450***@sip.integraphone.com.au>;tag=ivp3dibp jdzhbp2u.i
    From: "Remote - x704"<sip:61755361002@sip.integraphone.com.au>;tag =1414470434336225fc-9d6d-41ca-b354-fafd3b6d1680
    Call-ID: 23019766281195695_c6903d0d-5b0a-4efe...ygi-config.com
    CSeq: 180 INVITE
    Content-Type: application/sdp
    Server: Sippy
    Content-Length: 265

    v=0
    o=Sippy 227555376 1 IN IP4 203.160.8.75
    s=session
    t=0 0
    m=audio 56784 RTP/AVP 0 8 101
    c=IN IP4 203.160.8.75
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=silenceSuppff - - - -
    a=ptime:20
    a=sendrecv
    ***************************** SIP message buffer end ******************************

    16:10:51 TLayer::MsgToTU # Msg type: 183 # TID: 2464 # DID: 2463
    16:10:51 SipSessDlg::Inc1xxProc # Got 183 message # OID: 2463 # SID: 23019766281195695
    16:10:51 UA --> CM # Ringing # media exist # SID: 23019766281195695
    16:10:51 CM --> UA # OnRinging # Media exist # OID: 2462 # SID: 6075857661173098828
    16:10:51 SipSessDlg::SelfMediaHandling # State: remote offer, Sesssion Key: empty # OID: 2462 # SID: 6075857661173098828
    16:10:51 Try to send SIP message # (30/10/2014 05:10:51:491 GMT) # UDP # 664 bytes # buff size 0 # from: 192.168.1.250:5060 # to: 183.81.148.29:5062

    ***************************** SIP message buffer start *****************************
    SIP/2.0 183 Session Progress
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK969934416
    To: <sip:0450***@203.***>;tag=141447043420239e33-76ac-4a5d-b5c7-ee189edc253d
    From: "Test Skills" <sip:***704@203.***>;tag=951055896
    CSeq: 2 INVITE
    Call-ID: 1977150023@192.168.8.20
    Contact: <sip:0450***@203.***:5060>
    Content-Type: application/sdp
    Server: Epygi Quadro SIP User Agent/v5.3.63 (QUADRO-2X2)
    Content-Length: 213

    v=0
    o=- 424 555 IN IP4 203.***
    s=-
    c=IN IP4 203.***
    t=0 0
    m=audio 6028 RTP/AVP 0 8 101
    a=ptime:20
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    ***************************** SIP message buffer end ******************************

    16:11:03 Receive SIP message # (30/10/2014 05:11:03:479 GMT) # UDP # 500 bytes # buff size 1 # from: 203.160.8.75:5060 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    SIP/2.0 603 Declined
    Via: SIP/2.0/UDP 203.***:5060;rport=5060;branch=z9hG4bKEPSVBUS828b9 0c4-8322-4dee-9ff9-9bb72628f547
    Record-Route: <sip:203.160.8.75;lr>
    To: <sip:0450***@sip.integraphone.com.au>;tag=ivp3dibp jdzhbp2u.i
    From: "Remote - x704"<sip:61755361002@sip.integraphone.com.au>;tag =1414470434336225fc-9d6d-41ca-b354-fafd3b6d1680
    Call-ID: 23019766281195695_c6903d0d-5b0a-4efe...ygi-config.com
    CSeq: 180 INVITE
    Server: Sippy
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:11:03 TLayer::MsgToTU # Msg type: 603 # TID: 2464 # DID: 2463
    16:11:03 Try to send SIP message # (30/10/2014 05:11:03:483 GMT) # UDP # 551 bytes # buff size 1 # from: 192.168.1.250:5060 # to: 203.160.8.75:5060

    ***************************** SIP message buffer start *****************************
    ACK sip:0450***@sip.integraphone.com.au SIP/2.0
    Via: SIP/2.0/UDP 203.***:5060;rport;branch=z9hG4bKEPSVBUS828b90c4-8322-4dee-9ff9-9bb72628f547
    To: <sip:0450***@sip.integraphone.com.au>;tag=ivp3dibp jdzhbp2u.i
    From: "Remote - x704" <sip:61755361002@sip.integraphone.com.au>;tag=1414 470434336225fc-9d6d-41ca-b354-fafd3b6d1680
    CSeq: 180 ACK
    Call-ID: 23019766281195695_c6903d0d-5b0a-4efe...ygi-config.com
    User-Agent: Epygi Quadro SIP User Agent/v5.3.63 (QUADRO-2X2)
    Max-Forwards: 70
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:11:03 SipSessDlg::Inc6xxProc # Got 603 message # OID: 2463 # SID: 23019766281195695
    16:11:03 SipSessDlg::ErrorHandling # Error: Unknown, Move to terminate state # OID: 2463 # SID: 23019766281195695
    16:11:03 UA --> CM # ReportError # Error: Declined # Sip error: 603 # SID: 23019766281195695
    16:11:03 SipSessDlg::TerminateTransactions # OID: 2463 # SIPID: 23019766281195695_c6903d0d-5b0a-4efe...ygi-config.com # SID: 23019766281195695
    16:11:03 CM --> UA # OnReportError # Error: LineBusy # SIP error: 0 # OID: 2462 # SID: 6075857661173098828
    16:11:03 Try to send SIP message # (30/10/2014 05:11:03:589 GMT) # UDP # 365 bytes # buff size 0 # from: 192.168.1.250:5060 # to: 183.81.148.29:5062

    ***************************** SIP message buffer start *****************************
    SIP/2.0 486 Busy Here
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK969934416
    To: <sip:0450***@203.***>;tag=141447043420239e33-76ac-4a5d-b5c7-ee189edc253d
    From: "Test Skills" <sip:***704@203.***>;tag=951055896
    CSeq: 2 INVITE
    Call-ID: 1977150023@192.168.8.20
    Server: Epygi Quadro SIP User Agent/v5.3.63 (QUADRO-2X2)
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:11:03 SipSessDlg::TerminateTransactions # OID: 2462 # SIPID: 1977150023@192.168.8.20 # SID: 6075857661173098828
    16:11:03 Receive SIP message # (30/10/2014 05:11:03:690 GMT) # UDP # 323 bytes # buff size 1 # from: 183.81.148.29:5062 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    ACK sip:0450***@203.*** SIP/2.0
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK969934416
    From: "Test Skills" <sip:***704@203.***>;tag=951055896
    To: <sip:0450***@203.***>;tag=141447043420239e33-76ac-4a5d-b5c7-ee189edc253d
    Call-ID: 1977150023@192.168.8.20
    CSeq: 2 ACK
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:15:06 CGI has connected.
    16:15:06 UAConfManager::CGIOnConfigChanged # SIP configuration was changed, type: 112
    16:15:06 UAConfFileReader::CheckingSipLogLevel # LogLevel section is not changed
    16:15:06 UAConfFileReader::CheckingGlobalLogLevel # LogLevel section is not changed
    16:15:06 UAConfManager::UpdateLogLevel # Log level is not changed, level: 3 "All (usr/dev)"
    16:15:06 CGI has disconnected.
    16:17:02 Receive SIP message # (30/10/2014 05:17:02:562 GMT) # UDP # 914 bytes # buff size 1 # from: 183.81.148.29:5062 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    INVITE sip:0450***@203.*** SIP/2.0
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1050681669
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    To: <sip:0450***@203.***>
    Call-ID: 719879290@192.168.8.20
    CSeq: 1 INVITE
    Contact: <sip:***704@183.81.148.29:5062>
    Content-Type: application/sdp
    Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH, UPDATE, MESSAGE
    Max-Forwards: 70
    User-Agent: Yealink SIP-T22P 7.60.0.110
    Supported: replaces
    Allow-Events: talk,hold,conference,refer,check-sync
    Content-Length: 307

    v=0
    o=- 20018 20018 IN IP4 192.168.8.20
    s=SDP data
    c=IN IP4 183.81.148.29
    t=0 0
    m=audio 11792 RTP/AVP 0 8 18 9 101
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:9 G722/8000
    a=fmtp:101 0-15
    a=rtpmap:101 telephone-event/8000
    a=ptime:20
    a=sendrecv
    ***************************** SIP message buffer end ******************************

    16:17:02 Try to send SIP message # (30/10/2014 05:17:02:565 GMT) # UDP # 254 bytes # buff size 1 # from: 192.168.1.250:5060 # to: 183.81.148.29:5062

    ***************************** SIP message buffer start *****************************
    SIP/2.0 100 Trying
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1050681669
    To: <sip:0450***@203.***>
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    CSeq: 1 INVITE
    Call-ID: 719879290@192.168.8.20
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:17:02 TLayer::MsgToTU # Msg type: 51 # TID: 2468 # DID: 0
    16:17:02 UACore::TLReqMsgProc # Got INVITE SIP request
    16:17:02 Try to send SIP message # (30/10/2014 05:17:02:577 GMT) # UDP # 420 bytes # buff size 0 # from: 192.168.1.250:5060 # to: 183.81.148.29:5062

    ***************************** SIP message buffer start *****************************
    SIP/2.0 401 Unauthorized
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1050681669
    To: <sip:0450***@203.***>
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    CSeq: 1 INVITE
    Call-ID: 719879290@192.168.8.20
    Server: Epygi Quadro SIP User Agent/v5.3.63 (QUADRO-2X2)
    WWW-Authenticate: Digest realm="quadro",nonce="6f69e65c2f225f14a8dfb96a7d5e 0e77",opaque="1414646222"
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:17:02 Receive SIP message # (30/10/2014 05:17:02:679 GMT) # UDP # 273 bytes # buff size 1 # from: 183.81.148.29:5062 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    ACK sip:0450***@203.*** SIP/2.0
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1050681669
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    To: <sip:0450***@203.***>
    Call-ID: 719879290@192.168.8.20
    CSeq: 1 ACK
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:17:02 Receive SIP message # (30/10/2014 05:17:02:776 GMT) # UDP # 1133 bytes # buff size 1 # from: 183.81.148.29:5062 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    INVITE sip:0450***@203.*** SIP/2.0
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1669847073
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    To: <sip:0450***@203.***>
    Call-ID: 719879290@192.168.8.20
    CSeq: 2 INVITE
    Contact: <sip:***704@183.81.148.29:5062>
    Authorization: Digest username="***704", realm="quadro", nonce="6f69e65c2f225f14a8dfb96a7d5e0e77", uri="sip:0450***@203.***", response="a645d77a58166b863fa80b617f66032f", algorithm=MD5, opaque="1414646222"
    Content-Type: application/sdp
    Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH, UPDATE, MESSAGE
    Max-Forwards: 70
    User-Agent: Yealink SIP-T22P 7.60.0.110
    Supported: replaces
    Allow-Events: talk,hold,conference,refer,check-sync
    Content-Length: 307

    v=0
    o=- 20018 20018 IN IP4 192.168.8.20
    s=SDP data
    c=IN IP4 183.81.148.29
    t=0 0
    m=audio 11792 RTP/AVP 0 8 18 9 101
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:9 G722/8000
    a=fmtp:101 0-15
    a=rtpmap:101 telephone-event/8000
    a=ptime:20
    a=sendrecv
    ***************************** SIP message buffer end ******************************

    16:17:02 Try to send SIP message # (30/10/2014 05:17:02:779 GMT) # UDP # 254 bytes # buff size 1 # from: 192.168.1.250:5060 # to: 183.81.148.29:5062

  2. #2

    Default

    ***************************** SIP message buffer start *****************************
    SIP/2.0 100 Trying
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1669847073
    To: <sip:0450***@203.***>
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    CSeq: 2 INVITE
    Call-ID: 719879290@192.168.8.20
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:17:02 TLayer::MsgToTU # Msg type: 51 # TID: 2469 # DID: 0
    16:17:02 UACore::TLReqMsgProc # Got INVITE SIP request
    16:17:02 SipSessDlg: # Call ID Info # SID: 6075859258900740248 # 16:17:02 SipID: 719879290@192.168.8.20
    16:17:02 SipSessDlg::ChangeSessTimerFlag # user ***704 registered on UA # SessionTimer = 0
    16:17:02 SipSessDlg::ChangeSessTimerFlag # user ***704 # SessionTimer = 0
    16:17:02 SipSessDlg::IncInviteProc # Got INVITE message # OID: 2470 # SID: 6075859258900740248
    16:17:02 TargetQualifier::QualifyTargets # Try to qualify targets for dest 183.81.148.29 # OID: 2470
    16:17:02 TargetQualifier::NatHandling # Wait response from NATAgnet # OID: 2470
    16:17:02 SipDlg:etermineTarget # Wait for resolving destination: 183.81.148.29 # OID: 2470
    16:17:02 SipSessDlg::IncInviteProc # mLocalParams.mHostAddr = 203.*** localHostName = SkillsOnSafety.epygi-config.com OID: 2470 # SID: 6075859258900740248
    16:17:02 SipSessDlg::IncInviteProc # Set the mLocalParams.mHostAddr = and do SendMakeCall OID: 2470 # SID: 6075859258900740248
    16:17:02 UA --> CM # MakeCall # from: ***704@203.***:, to: 0450***, child: (empty), media exist, GUID: (empty) # ContactInfo: 183.81.148.29 # SID: 6075859258900740248
    16:17:02 MakeCall( Secure flag: Optional, SRTP Key size 0 ) # SID: 6075859258900740248
    16:17:02 TargetQualifier::NATAgentMsg # Got NAT response: 'apply NAT mapping' (203.***:5060) # ID: 6075859258900749614
    16:17:02 CallsAgent::OnMakeCall # MakeCall from CM # SID: 23021359714872706
    16:17:02 SipSessDlg: # Call ID Info # SID: 23021359714872706 # 16:17:02 SipID: 23021359714872706_5e0afd88-0a6f-432e...ygi-config.com
    16:17:02 SipSessDlg::ChangeSessTimerFlag # user 0450*** # SessionTimer = 0
    16:17:02 CM --> UA # MakeCall # from: 61755361002, to: 0450***@sip.integraphone.com.au:5060, media exist # replaceSID: 0 # privacy: 0x0 # AlertInfo: not exist # AddInfo: [OP#sip.integraphone.com.au:5060][BP#sip2.integraphone.com.au:5060][BO#sip2.integraphone.com.au:5060][NP#0:60] | (empty) anonymous not exists # Identity: (empty) #OID: 2471 # SID: 23021359714872706
    16:17:02 #MakeCall( Secure flag: Mandatory, SRTP Key size 0 ) OID: 2471 # SID: 23021359714872706
    16:17:02 SipSessDlg::CMOnMakeCall # Privacy is on , but without enough info.
    16:17:02 SipSessDlg::CMOnMakeCall # transport = UDP
    16:17:02 SipDlg::AddServerParams # Equal outbound params in primary server params, must discard outbound params # OID: 2471
    16:17:02 SipDlg::AddServerParams # Equal outbound params in backup server params, must discard outbound params # OID: 2471
    16:17:02 SipDlg:etermineInitTarget # Call to primary server # OID: 2471
    16:17:02 SipDlg:etermineInitTarget # destip: sip.integraphone.com.au remPort: 5060 transport: UDP
    16:17:02 TargetQualifier::QualifyTargets # Try to qualify targets for dest sip.integraphone.com.au # OID: 2471
    16:17:02 SipDlg:etermineTarget # Wait for resolving destination: sip.integraphone.com.au # OID: 2471

  3. #3

    Default

    16:17:03 TQAgent::UAMsgProc # Resolved addresses for host sip.integraphone.com.au via default dns
    DEST: 203.160.8.75 UDP Port: 65535 TTL: unknown
    16:17:03 TargetQualifier::NatHandling # Wait response from NATAgnet # OID: 2471
    16:17:03 TargetQualifier::NATAgentMsg # Got NAT response: 'apply NAT mapping' (203.***:5060) # ID: 6075859258900907387
    16:17:03 SipSessDlg::SelfMediaHandling # State: local offer, Sesssion Key: empty # OID: 2471 # SID: 23021359714872706
    16:17:03 SipDlg::SetPrivacyToMsg # The Privacy is not enabled (0x0)(privacy, Identity: (empty) # OID: 2471 # SID: 23021359714872706
    16:17:03 SipSessDlg::MakeSendInitInvite # mTargets.mAddInfo 0x1
    16:17:03 SipDlg::SignMsg # Find Credentials in cach by sip:0450***@sip.integraphone.com.au # cache size 0: # OID: 2471
    16:17:03 Try to send SIP message # (30/10/2014 05:17:03:025 GMT) # UDP # 1014 bytes # buff size 0 # from: 192.168.1.250:5060 # to: 203.160.8.75:5060

    ***************************** SIP message buffer start *****************************
    INVITE sip:0450***@sip.integraphone.com.au SIP/2.0
    Via: SIP/2.0/UDP 203.***:5060;rport;branch=z9hG4bKEPSVBUScc496fff-8cc3-4714-b03b-0b4843a49f27
    To: <sip:0450***@sip.integraphone.com.au>
    From: "Remote - x704" <sip:61755361002@sip.integraphone.com.au>;tag=1414 4704346c1eda76-e75c-4d70-95ae-d8efb9972757
    CSeq: 931 INVITE
    Call-ID: 23021359714872706_5e0afd88-0a6f-432e...ygi-config.com
    Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, SUBSCRIBE, NOTIFY, REFER, MESSAGE, UPDATE
    Contact: "Remote - x704" <sip:61755361002@203.***:5060>
    Content-Type: application/sdp
    Supported: replaces, norefersub
    User-Agent: Epygi Quadro SIP User Agent/v5.3.63 (QUADRO-2X2)
    Max-Forwards: 70
    Content-Length: 260

    v=0
    o=- 714 926 IN IP4 203.***
    s=-
    c=IN IP4 203.***
    t=0 0
    m=audio 6034 RTP/AVP 0 8 18 101
    a=ptime:20
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    ***************************** SIP message buffer end ******************************

    16:17:03 Cl3wh::TUMsgProc # Start timer for DNS SRV fail-over, msg type: 51, state: State_Empty # DID: 2471 # TID: 2472
    16:17:03 Receive SIP message # (30/10/2014 05:17:03:076 GMT) # UDP # 423 bytes # buff size 1 # from: 203.160.8.75:5060 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    SIP/2.0 100 Trying
    Via: SIP/2.0/UDP 203.***:5060;rport=5060;branch=z9hG4bKEPSVBUScc496 fff-8cc3-4714-b03b-0b4843a49f27
    To: <sip:0450***@sip.integraphone.com.au>
    From: "Remote - x704"<sip:61755361002@sip.integraphone.com.au>;tag =14144704346c1eda76-e75c-4d70-95ae-d8efb9972757
    Call-ID: 23021359714872706_5e0afd88-0a6f-432e...ygi-config.com
    CSeq: 931 INVITE
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:17:03 TLayer::MsgToTU # Msg type: 100 # TID: 2472 # DID: 2471
    16:17:03 SipSessDlg::Inc1xxProc # Got 100 message # OID: 2471 # SID: 23021359714872706
    16:17:03 Receive SIP message # (30/10/2014 05:17:03:180 GMT) # UDP # 806 bytes # buff size 1 # from: 203.160.8.75:5060 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    SIP/2.0 183 Session Progress
    Via: SIP/2.0/UDP 203.***:5060;rport=5060;branch=z9hG4bKEPSVBUScc496 fff-8cc3-4714-b03b-0b4843a49f27
    Record-Route: <sip:203.160.8.75;lr>
    To: <sip:0450***@sip.integraphone.com.au>;tag=arxxgyeu mgyniujw.i
    From: "Remote - x704"<sip:61755361002@sip.integraphone.com.au>;tag =14144704346c1eda76-e75c-4d70-95ae-d8efb9972757
    Call-ID: 23021359714872706_5e0afd88-0a6f-432e...ygi-config.com
    CSeq: 931 INVITE
    Content-Type: application/sdp
    Server: Sippy
    Content-Length: 265

    v=0
    o=Sippy 139652272 1 IN IP4 203.160.8.75
    s=session
    t=0 0
    m=audio 60244 RTP/AVP 0 8 101
    c=IN IP4 203.160.8.75
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=silenceSuppff - - - -
    a=ptime:20
    a=sendrecv
    ***************************** SIP message buffer end ******************************

    16:17:03 TLayer::MsgToTU # Msg type: 183 # TID: 2472 # DID: 2471
    16:17:03 SipSessDlg::Inc1xxProc # Got 183 message # OID: 2471 # SID: 23021359714872706
    16:17:03 UA --> CM # Ringing # media exist # SID: 23021359714872706
    16:17:03 CM --> UA # OnRinging # Media exist # OID: 2470 # SID: 6075859258900740248
    16:17:03 SipSessDlg::SelfMediaHandling # State: remote offer, Sesssion Key: empty # OID: 2470 # SID: 6075859258900740248
    16:17:03 Try to send SIP message # (30/10/2014 05:17:03:252 GMT) # UDP # 665 bytes # buff size 0 # from: 192.168.1.250:5060 # to: 183.81.148.29:5062

    ***************************** SIP message buffer start *****************************
    SIP/2.0 183 Session Progress
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1669847073
    To: <sip:0450***@203.***>;tag=1414470434c959918e-4988-4983-a393-582b94ef365c
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    CSeq: 2 INVITE
    Call-ID: 719879290@192.168.8.20
    Contact: <sip:0450***@203.***:5060>
    Content-Type: application/sdp
    Server: Epygi Quadro SIP User Agent/v5.3.63 (QUADRO-2X2)
    Content-Length: 213

    v=0
    o=- 485 340 IN IP4 203.***
    s=-
    c=IN IP4 203.***
    t=0 0
    m=audio 6032 RTP/AVP 0 8 101
    a=ptime:20
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    ***************************** SIP message buffer end ******************************

    16:17:15 Receive SIP message # (30/10/2014 05:17:15:232 GMT) # UDP # 500 bytes # buff size 1 # from: 203.160.8.75:5060 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    SIP/2.0 603 Declined
    Via: SIP/2.0/UDP 203.***:5060;rport=5060;branch=z9hG4bKEPSVBUScc496 fff-8cc3-4714-b03b-0b4843a49f27
    Record-Route: <sip:203.160.8.75;lr>
    To: <sip:0450***@sip.integraphone.com.au>;tag=arxxgyeu mgyniujw.i
    From: "Remote - x704"<sip:61755361002@sip.integraphone.com.au>;tag =14144704346c1eda76-e75c-4d70-95ae-d8efb9972757
    Call-ID: 23021359714872706_5e0afd88-0a6f-432e...ygi-config.com
    CSeq: 931 INVITE
    Server: Sippy
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:17:15 TLayer::MsgToTU # Msg type: 603 # TID: 2472 # DID: 2471
    16:17:15 Try to send SIP message # (30/10/2014 05:17:15:235 GMT) # UDP # 551 bytes # buff size 1 # from: 192.168.1.250:5060 # to: 203.160.8.75:5060

    ***************************** SIP message buffer start *****************************
    ACK sip:0450***@sip.integraphone.com.au SIP/2.0
    Via: SIP/2.0/UDP 203.***:5060;rport;branch=z9hG4bKEPSVBUScc496fff-8cc3-4714-b03b-0b4843a49f27
    To: <sip:0450***@sip.integraphone.com.au>;tag=arxxgyeu mgyniujw.i
    From: "Remote - x704" <sip:61755361002@sip.integraphone.com.au>;tag=1414 4704346c1eda76-e75c-4d70-95ae-d8efb9972757
    CSeq: 931 ACK
    Call-ID: 23021359714872706_5e0afd88-0a6f-432e...ygi-config.com
    User-Agent: Epygi Quadro SIP User Agent/v5.3.63 (QUADRO-2X2)
    Max-Forwards: 70
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:17:15 SipSessDlg::Inc6xxProc # Got 603 message # OID: 2471 # SID: 23021359714872706
    16:17:15 SipSessDlg::ErrorHandling # Error: Unknown, Move to terminate state # OID: 2471 # SID: 23021359714872706
    16:17:15 UA --> CM # ReportError # Error: Declined # Sip error: 603 # SID: 23021359714872706
    16:17:15 SipSessDlg::TerminateTransactions # OID: 2471 # SIPID: 23021359714872706_5e0afd88-0a6f-432e...ygi-config.com # SID: 23021359714872706
    16:17:15 CM --> UA # OnReportError # Error: LineBusy # SIP error: 0 # OID: 2470 # SID: 6075859258900740248
    16:17:15 SipSessDlg::TerminateTransactions # OID: 2470 # SIPID: 719879290@192.168.8.20 # SID: 6075859258900740248
    16:17:15 Try to send SIP message # (30/10/2014 05:17:15:297 GMT) # UDP # 366 bytes # buff size 0 # from: 192.168.1.250:5060 # to: 183.81.148.29:5062

    ***************************** SIP message buffer start *****************************
    SIP/2.0 486 Busy Here
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1669847073
    To: <sip:0450***@203.***>;tag=1414470434c959918e-4988-4983-a393-582b94ef365c
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    CSeq: 2 INVITE
    Call-ID: 719879290@192.168.8.20
    Server: Epygi Quadro SIP User Agent/v5.3.63 (QUADRO-2X2)
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    16:17:15 Receive SIP message # (30/10/2014 05:17:15:408 GMT) # UDP # 324 bytes # buff size 1 # from: 183.81.148.29:5062 # to: 192.168.1.250:5060

    ***************************** SIP message buffer start *****************************
    ACK sip:0450***@203.*** SIP/2.0
    Via: SIP/2.0/UDP 183.81.148.29:5062;branch=z9hG4bK1669847073
    From: "Test Skills" <sip:***704@203.***>;tag=1424407391
    To: <sip:0450***@203.***>;tag=1414470434c959918e-4988-4983-a393-582b94ef365c
    Call-ID: 719879290@192.168.8.20
    CSeq: 2 ACK
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

  4. #4

    Default

    SIP/2.0 603 Declined
    Via: SIP/2.0/UDP 203.***:5060;rport=5060;branch=z9hG4bKEPSVBUS828b9 0c4-8322-4dee-9ff9-9bb72628f547
    16:11:03 SipSessDlg::Inc6xxProc # Got 603 message # OID: 2463 # SID: 23019766281195695
    16:11:03 SipSessDlg::ErrorHandling # Error: Unknown, Move to terminate state # OID: 2463 # SID: 23019766281195695
    16:11:03 UA --> CM # ReportError # Error: Declined # Sip error: 603 # SID: 23019766281195695
    16:11:03 SipSessDlg::TerminateTransactions # OID: 2463 # SIPID: 23019766281195695_c6903d0d-5b0a-4efe...ygi-config.com # SID: 23019766281195695
    16:11:03 CM --> UA # OnReportError # Error: LineBusy # SIP error: 0 # OID: 2462 # SID: 6075857661173098828
    16:11:03 Try to send SIP message # (30/10/2014 05:11:03:589 GMT) # UDP # 365 bytes # buff size 0 # from: 192.168.1.250:5060 # to: 183.81.148.29:5062

    From an excerpt of codes found at - http://en.wikipedia.org/wiki/List_of...lure_Responses

    603 Decline
    The destination does not wish to participate in the call, or cannot do so, and additionally the destination knows there are no alternative destinations (such as a voicemail server) willing to accept the call.[1]:§21.6.2

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Error {"msg": "Authentication with 3pCC failed!"}
    By tecnico@dataspring.pt in forum Troubleshooting and Problems
    Replies: 2
    Last Post: 08-31-2011, 04:17 AM
  2. Diferences between new features "Listen-in", "Whisper", "Barge-in"
    By MefhigosetH in forum Suggestions and Feedback
    Replies: 1
    Last Post: 10-22-2009, 03:09 PM
  3. "number dialed does not exist" for Busy
    By mickmcmillan in forum Troubleshooting and Problems
    Replies: 6
    Last Post: 06-19-2009, 10:39 PM
  4. incoming calls with "unknown number"
    By dolmen in forum Tips and Tricks
    Replies: 5
    Last Post: 12-22-2008, 04:13 PM
  5. Quadro 2X "The Number You Have Dialled Is Unavailable"
    By P00HB33R in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 12-01-2008, 11:18 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •