Results 1 to 2 of 2

Thread: Route incoming call from PSTN

  1. #1

    Default Route incoming call from PSTN

    Hi guy
    have a big problem
    I'm configuring a Epygi Quadro M E1/T1 dual.
    the first E1 is connected to Algerian CO and the second to a PBX (working with CCS signaling protocol).
    Now, the calls from PBX to external called work but the vice versa does'nt work. I get a busy tone.
    in CO E1, the time slot are configured with R2 ANI Completted.
    I noticed that setting the "Route incoming call to" with 229 (DN of the unique extension connected to he Epygi just for the test),
    I get the call from PSTN.
    But, setting with " routing with inbound destinationnumber" (in order to route the call toward PBX E1), the calls don't work.

    Anyboby have any idea how to configure CO E1 time slot in order to route incoming call to PBX E1??

    Thx in advance
    Stephane

  2. #2

    Default

    Hi Stephane,

    Please let me now, do you use Quadro M32X as your PBX? If it so I will suggest you following configuration.

    On Quadro M E1/T1 for trunk which is connected to CO set the following.
    Route Incoming Call to: routing with inbound destination number(This will direct all your incoming calls from this trunk to Routing Table)

    Now On Call Routing table add an entry with the following settings.
    Destination Number Pattern: 456 (it is just example but in your case this must be your DID)
    Number of Discarded Symbols: 3 (this must match with the number of symbols of Destination Number Pattern)
    Prefix: 00 (this is the destination number of call which will arrive in PBX, in this case this is Auto Attendant of PBX but you can choose any destination)
    Destination Type: E1/T1
    Filter on Source / Modify Caller ID: set this check box

    Port ID: E1/T1 Trunk1(Trunk to PBX, for outgoing call)

    Timeslots: Select all(it is just example, you can choose any number)

    next two pages are used for filtering incoming calls
    Source Type: E1/T1

    Port ID: E1/T1 Trunk2(Trunk to CO)

    With this configuration all your incoming calls from CO will be routed to RT and will match with routing pattern "456" which will direct your call to PBX Auto Attendant.

    Regards,
    Davit
    Last edited by Davit_M; 09-12-2014 at 04:33 AM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Routing for incoming IP-pstn call
    By tsim in forum 'How Do I' Questions
    Replies: 7
    Last Post: 12-23-2010, 04:14 AM
  2. route incoming calls to CRT
    By peterd in forum Troubleshooting and Problems
    Replies: 4
    Last Post: 06-24-2010, 11:59 AM
  3. Replies: 4
    Last Post: 06-14-2010, 08:20 AM
  4. Replies: 0
    Last Post: 06-11-2010, 12:01 AM
  5. What’s BEST - route incoming call
    By megatron in forum Installation
    Replies: 2
    Last Post: 10-23-2006, 11:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •