Results 1 to 4 of 4

Thread: Doorbell Fon integration

  1. #1

    Question Doorbell Fon integration

    I have a quadra 4l and am integrating a Doorbell Fon from homephone.com for a client.

    This device needs to be connected to the FXO line. So FXO3 and FXO 4 are door phone 1 and 2 respectively.

    In call routing I want to make sure that 911 emergency calls are not routed to these door phone FXO lines.
    As I cannot edit the 911 call routing how do I ensure that this call is routed to the PSTN lines on FXO1 or FXO 2.

  2. #2

    Default

    Dear Lalisingh,

    If you have FXO1 and FXO2 connected, it would try to make calls through these lines at first. Then if these lines are busy, or not working the call 911 would failover to FXO3 and FXO4 respectively.

    Regards,

    LevonD

  3. #3

    Default

    Quote Originally Posted by LevonD View Post
    Dear Lalisingh,

    If you have FXO1 and FXO2 connected, it would try to make calls through these lines at first. Then if these lines are busy, or not working the call 911 would failover to FXO3 and FXO4 respectively.

    Regards,

    LevonD
    Thank you for the update. Poking around a bit I see an option to set the FXO line to incoming calls only. If I opt for this option on FXO3 and 4 will I force the 911 emergency calls to also choose only FXO 1 and 2? There is no need in this application to ever call out on FXO 3 and 4.

  4. #4

    Default

    Dear Lalisingh,

    Definitely yes, you could configure FXO3 and FXO4 only for Incoming calls, if this setup suits You.

    Regards,

    LevonD

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Goldmine CRM integration
    By serviplexSIP in forum 3PCC
    Replies: 3
    Last Post: 10-07-2011, 02:10 PM
  2. 3pCC and Integration
    By KSComs in forum 3PCC
    Replies: 6
    Last Post: 05-17-2010, 05:20 AM
  3. Snom with CTI Integration
    By KSComs in forum Installation
    Replies: 0
    Last Post: 05-12-2010, 08:34 PM
  4. Integration to 4x via TCP/IP
    By Brent Simpson in forum 'How Do I' Questions
    Replies: 1
    Last Post: 03-31-2010, 03:00 AM
  5. Legacy PBX and PSTN - E1 - Integration
    By zgor in forum Hardware Interoperability
    Replies: 3
    Last Post: 11-11-2009, 01:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •