Doorbell Fon integration

[Lalisingh]

I have a quadra 4l and am integrating a Doorbell Fon from homephone.com for a client.

This device needs to be connected to the FXO line. So FXO3 and FXO 4 are door phone 1 and 2 respectively.

In call routing I want to make sure that 911 emergency calls are not routed to these door phone FXO lines.
As I cannot edit the 911 call routing how do I ensure that this call is routed to the PSTN lines on FXO1 or FXO 2.

[LevonD]

Dear Lalisingh,

If you have FXO1 and FXO2 connected, it would try to make calls through these lines at first. Then if these lines are busy, or not working the call 911 would failover to FXO3 and FXO4 respectively.

Regards,

LevonD

[Lalisingh]

Dear Lalisingh,

If you have FXO1 and FXO2 connected, it would try to make calls through these lines at first. Then if these lines are busy, or not working the call 911 would failover to FXO3 and FXO4 respectively.

Regards,

LevonD

Thank you for the update. Poking around a bit I see an option to set the FXO line to incoming calls only. If I opt for this option on FXO3 and 4 will I force the 911 emergency calls to also choose only FXO 1 and 2? There is no need in this application to ever call out on FXO 3 and 4.

[LevonD]

Dear Lalisingh,

Definitely yes, you could configure FXO3 and FXO4 only for Incoming calls, if this setup suits You.

Regards,

LevonD