Results 1 to 2 of 2

Thread: communication between 2 quadro's

  1. #1

    Exclamation communication between 2 quadro's

    We have the above Systems sitting on each side of a wireless controlled be a Microteck router.... At the moment we cannot get them to dial each others extensions... they can dial the internal extensions but not each other. The extensions are 200 range and a 300 range. We have tested to see if the ports are open by registering a phone across the wireless to the other system and it works hundreds. If I dial the other side ext it says "number temporarily unavailable", but on that phone shows as a missed call (does not ring), so it is reaching the phone, and assume it is not getting back to us.
    Last edited by nicolab@gracan.co.za; 01-25-2013 at 07:53 AM.

  2. #2

    Default define the SIP alias...

    you need to define the quadro as a sip alias on "quadro-ip-address/sipaliases.cgi"

    I had the same problem after creating the routing patterns and everything, adding the alias solved the problem...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Please Help - Call gets connected to other Quadro's extension
    By ssajjad in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 08-25-2011, 07:07 PM
  2. Multiple Quadro's acting as one.
    By Leeinsa in forum VoIP Service Opinions
    Replies: 2
    Last Post: 11-26-2010, 04:05 AM
  3. Firmware 5.1 on other quadros
    By lambsons in forum General Discussions
    Replies: 6
    Last Post: 05-15-2009, 03:32 PM
  4. one way communication...
    By paulk in forum Troubleshooting and Problems
    Replies: 23
    Last Post: 10-22-2008, 05:07 PM
  5. VPN between Quadros
    By lebenton in forum 'How Do I' Questions
    Replies: 3
    Last Post: 04-12-2007, 02:37 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •