Results 1 to 4 of 4

Thread: QuadroFXO Gateway as Expansion Board

  1. #1

    Question QuadroFXO Gateway as Expansion Board

    Hi everybody, i already followed the instructions to share my quadro fxo gateway (6 fxo lines) with my quadro m8l but it doesn't works...no yet

    My M8L (10.2.1.200) has DHCP for LAN , i connected the FXOGateway WAN's (10.2.1.147) to the M8L LAN's Port, and the FXOGateway LAN Port to my PC.

    I enabled the PSTN external lines, i set an user and password test/test in the Quadro M8L

    Now i moved to the 10.2.1.147 to activate the PSTN Lines shared. I enabled the setting with the properly parameters test/test master device ip: 10.2.1.200 and port: 5060 and saved that.

    I checked the FXO lines settings in my FXO gateway and they are now routing to my M8L AA

    When i check the FXO lines settings in the M8L there are just 8 FXO lines assigned,...not 14

    What am i doing bad or what did i messed up ?

    Please someone answer !
    Attached Images Attached Images

  2. #2

    Default

    Your M8L has DHCP enabled for LAN, you connected the FXO GW WAN to the M8L LAN so assuming FXO GW should receive IP address from M8L. The DHCP IP address range for M8L is 172.30.0.100-172.30.0.254. So how FXO GW received 10.2.1.147 as IP?

  3. #3

    Default

    Quote Originally Posted by Ashot View Post
    Your M8L has DHCP enabled for LAN, you connected the FXO GW WAN to the M8L LAN so assuming FXO GW should receive IP address from M8L. The DHCP IP address range for M8L is 172.30.0.100-172.30.0.254. So how FXO GW received 10.2.1.147 as IP?
    Thanks for the update, because we assigned the IP address 10.2.1.200 and the range for DHCP LAN is 10.2.1.101-150/24

    By the way, the FXO gateway has already the 10.2.1.201 and already has shared his FXO lines to the M8L but i can't configure them. Let me show you.
    Attached Images Attached Images

  4. #4

    Default

    Your FXO GW isn't registered on M8L. By the way M8L with IP address 10.2.1.200 couldn't have the range for DHCP LAN as 10.2.1.101-150/24. M8L should refuse such configuration with error message.
    To be honest is there a strong reason you don't want the FXO GW to receive IP from DHCP IP address range of 172.30.0.100-172.30.0.254?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Cell phone gateway for the Quadro?
    By Internet in forum Tips and Tricks
    Replies: 2
    Last Post: 02-12-2010, 07:59 PM
  2. Firmware bug for 2XI and FXO Gateway current firmware
    By KSComs in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 06-26-2009, 08:59 AM
  3. Quadro 2x PBX and Quadro ISDN Gateway
    By NuV1 in forum Troubleshooting and Problems
    Replies: 7
    Last Post: 05-06-2009, 12:24 PM
  4. Quadro 2x & QuadroFXO Outbound Issues
    By person in forum Troubleshooting and Problems
    Replies: 4
    Last Post: 11-07-2007, 03:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •