Results 1 to 4 of 4

Thread: Auto config not working, phone wont flush

  1. #1
    Senior Member
    Join Date
    Oct 2008
    Location
    Melbourne, Australia
    Posts
    107

    Default Auto config not working, phone wont flush

    Hi All

    I had a 4xi and a gateway. 4xi was xxx.xxx.17.6 and gtwy was 17.7

    4xi died, replaced with a new 4li

    Have setup auto config, using windows DHCP, option 66: xxx.xxx.17.6, option 067: ipeconfig/snome-{mac}.htm

    I know this setup works.

    But it's really difficult to get the Snoms to pick it up.

    The phone log is saying:
    "[5]24/12/2001 00:00:12: Using GUI language English from: /mnt/snomlang/gui_lang_EN.xml
    [5]24/12/2001 00:00:12: Using WEB language English from: /mnt/snomlang/web_lang_EN.xml
    [5]24/12/2001 00:00:13: read_xml_settings: found dial-plan XML header
    [5]24/12/2001 00:00:13: read_xml_settings: found one byte encoding: 0
    [0]24/12/2001 00:00:21: Disabled IP Fragmentation DF-Bit=1
    [0]24/12/2001 00:00:21: Phone::uboot_version:1.1.3-s
    [5]24/12/2001 00:00:21: Opening TCP socket on port 843
    [5]24/12/2001 00:00:21: Fetching URL: http://xxxx.17.7/snom.cgi?mac=00041xxxF5xx
    [5]24/12/2001 00:00:21: Conf setup: found old style settings
    [5]24/12/2001 00:00:21: Fetching URL: http://127.0.0.1/dummy.htm"

    NOTE: Trying from 17.7 !!??
    How is that possible? I reset the phone from the web interface.

    Phones where the config HAS finally taken hold, show the following in the logs:
    [5]24/12/2001 00:00:19: Fetching URL: http://xxx.xxx.17.6/snom.cgi?mac=000413273xxx
    [5]24/12/2001 00:00:19: read_xml_settings: found settings (container) XML header
    [5]24/12/2001 00:00:19: read_xml_settings: found phone-settings XML header
    [5]24/12/2001 00:00:19: read_xml_settings: found one byte encoding: 1

    Note the 17.6.

    What is going on here? Where is the Snom getting 17.7 from?
    The strangest thing is that 17.7 is just a gateway: It never served as a DHCP or registration host.

    Any ideas... this has got me stumped

    Cheers
    Michael

  2. #2
    Senior Member
    Join Date
    Oct 2008
    Location
    Melbourne, Australia
    Posts
    107

    Default

    Wow, I even manually set "http://xxx.xxx.17.6/snom.cgi?mac=00041328xxxx" in Update -> Setting URL.

    Still, upon reboot, it tries 17.7

  3. #3
    Senior Member
    Join Date
    Oct 2008
    Location
    Melbourne, Australia
    Posts
    107

    Default

    Ok, I seem to have found solution.

    I removed 17.7 temporarily off the network.

    Dag namit these snoms!

    Where the heck was it getting 17.7 from ?!!

  4. #4
    Senior Member
    Join Date
    Oct 2008
    Location
    Melbourne, Australia
    Posts
    107

    Default

    Can anybody please explain this?

    I am now have a phone still stuck looking up 17.7, and I have the FXO back at 17.7, and I would prefer not to move it.

    I flush the snom 300, and yet still I get it hitting up 17.7. THis makes no sense.

    [5]24/12/2001 00:00:10: Using GUI language English from: /mnt/snomlang/gui_lang_EN.xml
    [5]24/12/2001 00:00:10: Using WEB language English from: /mnt/snomlang/web_lang_EN.xml
    [5]24/12/2001 00:00:19: DHCP: Received IP address xxx.xxx.17.103
    [0]24/12/2001 00:00:19: Phone::uboot_version:1.1.3-s
    [5]24/12/2001 00:00:19: Opening TCP socket on port 843
    [5]24/12/2001 00:00:19: Fetching URL: http://xxx.xxx.17.7/snom.cgi?mac=00041328xxxx
    [5]24/12/2001 00:00:19: Conf setup: found old style settings
    [5]24/12/2001 00:00:19: Fetching URL: http://127.0.0.1/dummy.htm

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Line auto config does not update
    By medoneit in forum Troubleshooting and Problems
    Replies: 2
    Last Post: 10-05-2011, 12:56 AM
  2. Auto attendant for different working hours
    By matic.topolovec@optisis.si in forum 'How Do I' Questions
    Replies: 3
    Last Post: 05-06-2011, 02:35 PM
  3. Remote phone(easiest to config)
    By serviplexSIP in forum 'How Do I' Questions
    Replies: 9
    Last Post: 06-09-2009, 05:29 AM
  4. Door phone config.
    By joeltric in forum 'How Do I' Questions
    Replies: 1
    Last Post: 07-18-2008, 02:56 PM
  5. Snom 320 auto config picking up correct extension
    By synaxis in forum 'How Do I' Questions
    Replies: 1
    Last Post: 01-07-2008, 04:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •