Results 1 to 10 of 10

Thread: Pickup Extension from command

  1. #1

    Default Pickup Extension from command

    Hello,
    I have a question.
    Can i create in call routing one routing to pickup an extension call.
    Like 66??? discard first two digits and pickup a call from dial extension ?

    I already have create de imput in call routing as example :
    66 + number from extension = 66408 discard first two digits and pickup call from extension 408.
    But when i make this i only can call de extension 408 and not pickup de call from that extension.

  2. #2

    Default

    Hi, why you don't use the pickup group feature to pickup the call to extension 408?

  3. #3

    Default

    Quote Originally Posted by Ashot View Post
    Hi, why you don't use the pickup group feature to pickup the call to extension 408?
    Because i have to configure many pickup Groups to all extension and the pickup group is diferent to all
    And if i have one input in call routing that let me pickup the call from any extesion is more simple.
    like 66 + 401 or 66+402 or 66+408 , etc.

    if i use the pickup group i have to create one pickup group to all extension like
    66401 660402 , etc and is not simple this way.

  4. #4

    Default

    makes perfect sense, we will take into account your suggestion.
    thanks

  5. #5

    Default

    Quote Originally Posted by hrant View Post
    makes perfect sense, we will take into account your suggestion.
    thanks
    Can you tell me the command used from Yealink BFL.
    I have two epygi quadro 12Li in two Office with Sip Trunk.

  6. #6

    Default

    I just mentioned that we will take into account your suggestion and consider implementing it. There is no command and the feature is not implemented yet.

  7. #7

  8. #8

    Default

    Hi,

    Your suggestion is formalized and included in the Epygi To-Do list, but unfortunately is not implemented yet. Will inform you ASAP when it implemented in some future SW release

    Thanks

  9. #9

    Default

    Hi,
    Why not use *94 + Extension Number + # ?
    Intercept allows you to pick up a ringing call on another specified extension after this feature code is dialed.

  10. #10

    Default

    Quote Originally Posted by lunacom View Post
    Hi,
    Why not use *94 + Extension Number + # ?
    Intercept allows you to pick up a ringing call on another specified extension after this feature code is dialed.
    Thanks ,Lunacom

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Run EMS from a command-line
    By darylp in forum 'How Do I' Questions
    Replies: 9
    Last Post: 12-17-2012, 05:12 AM
  2. How to have an extension pickup the fxo line when going offhook
    By irnchriz in forum 'How Do I' Questions
    Replies: 1
    Last Post: 07-29-2011, 03:37 AM
  3. Replies: 2
    Last Post: 04-26-2011, 11:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •