error 403 Non-self Request-URI

[wbts]

How to deal with the fact when a quadro rejects incoming sip call with a 403 error code Non Seld Request URI code



08:50:02.083279 IP (tos 0x0, ttl 60, id 0, offset 0, flags [DF], proto UDP (17), length 387) 94.247.165.195.not.updated.openip-cs.net.sip > nymphadora.sip: SIP, length: 359
SIP/2.0 403 Non-self Request-URI
Via: SIP/2.0/UDP 194.98.81.144:5060;rport=5060;branch=z9hG4bK3138b5 83

thansk four your help

[AramS]

Hello,

You can try to enable "Accept stray SIP requests" from 'generalconfig.cgi' hidden page (http://172.30.0.1/generalconfig.cgi).
Note: Be very careful and will not change any other parameter.

Regards,
Aram.

[thodgen]

Hello,

You can try to enable "Accept stray SIP requests" from 'generalconfig.cgi' hidden page (http://172.30.0.1/generalconfig.cgi).
Note: Be very careful and will not change any other parameter.

Regards,
Aram.

This post is from several years ago. Is that still the recommendation for this error code, or are there other more current suggestions.

[Qlkt]

This post is from several years ago. Is that still the recommendation for this error code, or are there other more current suggestions.

Good day,

This is still indeed a solution.
I struggled a few hours then saw this post.

Problem solved within 3min.