Connecting Quadro 4Li to legacy BP250 PBX

[lambsons]

Hi There,

I am connecting a Quadro 4Li to a legecy BP250 PBX, the ISDN BRI ports on the Quadro are set to "network".
We are having an issue when trying to dial out from the quadro extensions to the PSTN lines on the legacy PBX.
We think it could be caused by the digits going through all at once.
Is there a way to enable overlap dialing on the Quadro 4Li ISDN ports?
Would the "Alert Guard Timeout" Help in this case?

regards,
Shaun

[artur_s]

Hi Shaun

Quadro support Overlap Receive/Transmit features for both User/Network modes.
To enable Overlap Rx/Tx modes Quadro should receive/send incomplete destination number.

The Incoming Called Digits Size text field and T302 timer selections are related to Overlap Rx mode feature. You may get description of these parameters from online help.
"Alert Guard Timeout will not help in this case.


Artur

[lambsons]

Hi Artur,

Thank you for the reply, will go through these settings and give it a try.

regards,

Shaun

[Jesse Brown]

This post is really great and I truly enjoyed reading it.Waiting for some more great posts like this from you in the coming days.

vampires codes