Results 1 to 2 of 2

Thread: How to Configure international calling via Internet

  1. #1

    Default How to Configure international calling via Internet

    Hello,

    We have a Epygi Quadro PBX which we now configured to make international calls via our phone company.

    We just purchased a high internet bandwidth and would like to use the INTERNET to make international calls.

    I don't know where to start (what to check and what to do). I don't even know how to check if this is possible and how to configure this.

    Can anyone help me understand how calling via internet will work using the PBX?

    Any response in this matter is very much appreciated.

    Thank you and kind regards,
    Soen

  2. #2

    Default

    Quote Originally Posted by IBIS_SOEN View Post
    Hello,

    We have a Epygi Quadro PBX which we now configured to make international calls via our phone company.

    We just purchased a high internet bandwidth and would like to use the INTERNET to make international calls.

    I don't know where to start (what to check and what to do). I don't even know how to check if this is possible and how to configure this.

    Can anyone help me understand how calling via internet will work using the PBX?

    Any response in this matter is very much appreciated.

    Thank you and kind regards,
    Soen
    Soen, I would suggest to look at where your international calls are going to go to - main ones and look at either getting a Sip trunk from that location or look for Sip providers that are in your country. If there are none, then you might have a problem obtaining business services...

    The Quadro is capable of many SIP trunk registrations, so it is possible to set up multiple trunks to other geographics that offer the cheapest routes.

    Look for help on the Voip Carrier Wizard inside the Quadro.

    Or under the telephony tab you will see a link to the same

    Regards

    Kevin

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. International Calls: 5% succeed, 95% '404 Not Found' - same number dialled
    By squiretech in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 06-09-2010, 03:00 AM
  2. from Alcatel trough Epygi E1/T1 to international
    By joseluis in forum Troubleshooting and Problems
    Replies: 3
    Last Post: 12-14-2009, 09:13 AM
  3. How to configure S450Ip on 2xi
    By Skyline in forum Hardware Interoperability
    Replies: 1
    Last Post: 11-18-2009, 01:33 PM
  4. Auto configure SnomM3
    By medoneit in forum 'How Do I' Questions
    Replies: 1
    Last Post: 09-25-2009, 04:12 AM
  5. Update firmware by Internet
    By Amper in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 04-22-2008, 02:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •