Hello Everyone,

I am trying very hard to have ALL outbound AND inbound call routes handled via the Call Routing table of a Quadro 2x.

When run, the VoIP Carrier Wizard creates extension 99 in the Extensions Table and then sets UCF on that extension to whatever extension you tell it. In my case, the AA. It also creates outbound call routes that use the extension settings of extension 99 in the Call Routing Table. And this does work.

But, following Epygi's own documentation, they suggest for highest security, the option "Route all incoming SIP calls to Call Routing", should be checked. When this option is checked, I keep getting: "The subscriber you have dialed is not in service..."

For those more advanced members, here is an excerpt from a recent call log:

23:29:11.516 * <-> * ExternalSIPCallRoute: caller - 17274304008@4.55.12.163, target - 17274752391@4.79.132.209, callID - 5481353016819273657, media - [<D>4.55.12.130:20888, a: PCMU(0), PCMA(8), G729(18)(annexb=no), telephone-event(101)(fmtp:0-15)].
.561 GetCR: [SIP/17274304008@4.55.12.163(4.79.132.209)|17274752391]-><17274752391>->PBX/17274752391.
.563 UpdateSIPUserInfo: UN:17274752391, ID:, HA:4.79.132.210, HP:5060, SD:[BP#4.79.132.209:5060][NP#0:60]
.565 * <-> * ExternalSIPCallRoute: no such extension - 17274752391, callID - 5481353016819273657.
.566 ExternalCallReportError: error code - "User Not Found", callID - 5481353016819273657.
23:29:41.900 * <-> * ExternalSIPCallRoute: caller - 17274304008@4.55.12.163, target - 17274752391@4.79.132.209, callID - 5481353145668676993, media - [<D>4.55.12.130:13962, a: PCMU(0), PCMA(8), G729(18)(annexb=no), telephone-event(101)(fmtp:0-15)].
.945 GetCR: [SIP/17274304008@4.55.12.163(4.79.132.209)|17274752391]-><17274752391>->PBX/17274752391.
.947 UpdateSIPUserInfo: UN:17274752391, ID:, HA:4.79.132.210, HP:5060, SD:[BP#4.79.132.209:5060][NP#0:60]
.952 * <-> * ExternalSIPCallRoute: no such extension - 17274752391, callID - 5481353145668676993.
.953 ExternalCallReportError: error code - "User Not Found", callID - 5481353145668676993.
23:31:22.970 OnCgiPartyStateChanged: CGI messenger is connected.
.973 OnUpdate: update type - 0x40.
Parameter 1: 2.
23:31:23.138 OnCgiPartyStateChanged: CGI messenger is disconnected.
23:31:37.511 * <-> * ExternalSIPCallRoute: caller - 17274304008@4.55.12.163, target - 17274752391@4.79.132.209, callID - 5481353643884493651, media - [<D>4.55.12.130:16364, a: PCMU(0), PCMA(8), G729(18)(annexb=no), telephone-event(101)(fmtp:0-15)].
.552 GetCR: [SIP/17274304008@4.55.12.163(4.79.132.209)|17274752391]->N/A
.553 ExternalCallReportError: error code - "User Not Found", callID - 5481353643884493651.
I created a route in the CRT:
Destination Pattern=17274752391@4.79.132.209
Destination Type=SIP
Source Pattern=*
Source Type=Any

I want to know how to set up the inbound call routes so that I do not have to create an extension in the Extensions Table for EVERY SIP account we have. This seems not correct as we have five separate DIDs, each requiring an entry in the Extensions Table to handle the incoming calls, and five separate outbound call routes in the Call Routing table for dialing out with each distinct DID.

There has got to be a better way to manage inbound and outbound calling. Anybody got some concrete ideas?