Results 1 to 5 of 5

Thread: Quadro E1 and Ascom IP Dect

  1. #1

    Default Quadro E1 and Ascom IP Dect

    I am trying to register ip dect phones to the Quadro and am not able to make them work.

    I believe that in general to setup a new sip phone I go into the line settings of the extension, select other and enter a user name and password. I then go to the phone, point it to the ip address of the quadro, and give it the same user name and password (this is what i have done with 2*Pancode IP door stations)

    One of the ascom ip base stations (IPBS) is set to master, and all of the phone registration details are set in that base station. The phones (d62) are talking to the base stations and to each other, but they show 'pbx out of service' on their display.

    Any advice much appreciated.

    Thank you.

  2. #2

    Default

    The title of your post says "Quadro E1" - is it Quadro E1 gateway? Take into account that only Quadro IP PBXs accept the IP phone registration.
    If it is Quadro IP PBX model then check the SIP registration logs on Quadro. Do you see any registration messages received from the base station?

  3. #3

    Default Epygi and Ascom IP dect

    This is what the log says:

    From: <sip:admin@192.168.0.141>;tag=999501397584a4d8d-5f35-4cb8-b9b2-231e9601413c
    CSeq: 893 INVITE
    Call-ID: 9f7b1455-2ca7-41e5-acda-cc3c7ce421ff...ygi-config.loc
    Accept: text/x-epygi-ms
    Contact: <sip:MasterAgent@192.168.0.254:5060>
    Server: Epygi Quadro SIP User Agent/v5.1.31 (QUADROM-IPPBX)
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    08:11:24 Receive SIP message # (27/04/2010 22:11:24:286 GMT) # UDP # 510 bytes # buff size 1 # from: 192.168.0.141:5060 # to: 192.168.0.254:5060

    ***************************** SIP message buffer start *****************************
    ACK sip:MasterAgent@192.168.0.254:5060 SIP/2.0
    Via: SIP/2.0/UDP 192.168.0.141:5060;rport;branch=z9hG4bKEPSVBUSdb82 c2f7-c2e0-40a0-888b-bf27cdc85475
    To: <sip:MasterAgent@192.168.0.254>;tag=1013578638543f d746-83e0-410e-ad78-9b2c36e964f4
    From: <sip:admin@192.168.0.141>;tag=999501397584a4d8d-5f35-4cb8-b9b2-231e9601413c
    CSeq: 893 ACK
    Call-ID: 9f7b1455-2ca7-41e5-acda-cc3c7ce421ff...ygi-config.loc
    User-Agent: Epygi Quadro SIP User Agent/v5.1.13 (QUADRO-FXO)
    Max-Forwards: 70
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    Max-Forwards: 70
    Authorization: Digest realm="quadrom.epygi-config.loc",nonce="a3c27b8c6951bcd99bc292a845a3481 7",username="admin",uri="sip:MasterAgent@192.168.0 .254:5060",opaque="1272406284",response="86ac3cd9a 21d5ca6c14162b1a996f471"
    Content-Length: 556

    13***************************** SIP message buffer end ******************************

    08:11:24 Try to send SIP message # (27/04/2010 22:11:24:230 GMT) # UDP # 359 bytes # buff size 1 # from: 192.168.0.254:5060 # to: 192.168.0.141:5060

    ***************************** SIP message buffer start *****************************
    SIP/2.0 100 Trying
    Via: SIP/2.0/UDP 192.168.0.141:5060;rport=5060;branch=z9hG4bKEPSVBU S7293dffb-48ae-479d-accf-908f85badcd0
    To: <sip:MasterAgent@192.168.0.254>
    From: <sip:admin@192.168.0.141>;tag=999501397584a4d8d-5f35-4cb8-b9b2-231e9601413c
    CSeq: 893 INVITE
    Call-ID: 9f7b1455-2ca7-41e5-acda-cc3c7ce421ff...ygi-config.loc
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    08:11:24 Try to send SIP message # (27/04/2010 22:11:24:252 GMT) # UDP # 539 bytes # buff size 0 # from: 192.168.0.254:5060 # to: 192.168.0.141:5060

    ***************************** SIP message buffer start *****************************
    SIP/2.0 200 OK
    Via: SIP/2.0/UDP 192.168.0.141:5060;rport=5060;branch=z9hG4bKEPSVBU S7293dffb-48ae-479d-accf-908f85badcd0
    To: <sip:MasterAgent@192.168.0.254>;tag=1013578638543f d746-83e0-410e-ad78-9b2c36e964f4

    Any ideas?

    Thanks

  4. #4

    Default

    And this is the sip registration log:

    CSeq: 228 REGISTER
    Contact: <sip:226@192.168.0.241:2187;transport=UDP>;expires =120
    Content-Length: 0
    Expires: 120
    Max-Forwards: 70
    User-Agent: (Ascom IP-DECT Base Station/ [3.2.6/3.0.26/IPBS1-A3/4D])
    Allow-Events: reg,dialog,message-summary

    ***************************** SIP message buffer end ******************************

    08:37:37 Registrar # GetAORByName #user: 226, host 192.168.0.241 user count 0
    08:37:37 Try to send SIP message # (27/04/2010 22:37:37:809 GMT) # UDP # 361 bytes # buff size 0 # from: 192.168.0.254:5060 # to: 192.168.0.241:2187

    ***************************** SIP message buffer start *****************************
    SIP/2.0 404 No Such Line Configured
    Via: SIP/2.0/UDP 192.168.0.241:2187;rport=2187;branch=z9hG4bK-F70FAD5F
    To: <sip:226@192.168.0.254>
    From: <sip:226@192.168.0.254>;epid=00013e01bed9;tag=2557 692407
    CSeq: 228 REGISTER
    Call-ID: 66a07127e909d311abb700013e01bed9@192.168.0.241
    Server: Epygi Quadro SIP User Agent/v5.1.31 (QUADROM-IPPBX)
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

  5. #5

    Default

    Seems to work better when I register with name not number -but syill showing pbx out of service

    Allow-Events: dialog
    X-Real-IP: 192.168.0.140
    Authorization: Digest username="locext198",realm="quadrom.epygi-config.loc",nonce="7b84b3644d0cbb441677196b5373fe1 b",uri="sip:192.168.0.254:5060",response="45ee18a1 2ba983d4a122573bc8ecf5bc",opaque="1272408536",algo rithm=MD5
    Expires: 3600
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

    08:48:56 Registrar # GetAORByName #user: locext198, host 192.168.0.140 user count 1
    08:48:56 Try to send SIP message # (27/04/2010 22:48:56:770 GMT) # UDP # 423 bytes # buff size 0 # from: 192.168.0.254:5060 # to: 192.168.0.140:1024

    ***************************** SIP message buffer start *****************************
    SIP/2.0 200 OK
    Via: SIP/2.0/UDP 192.168.0.140:1024;rport=1024;branch=z9hG4bK-y7wlrw316jdr
    To: "Ext. 198" <sip:locext198@192.168.0.254:5060>
    From: "Ext. 198" <sip:locext198@192.168.0.254:5060>;tag=ncz4kpbfk c
    CSeq: 672 REGISTER
    Call-ID: 3c267029323d-9plj2z8pd5ke
    Contact: <sip:locext198@192.168.0.140:1024;transport=UDP>
    Expires: 3600
    Server: Epygi Quadro SIP User Agent/v5.1.31 (QUADROM-IPPBX)
    Content-Length: 0

    ***************************** SIP message buffer end ******************************

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Nec-Philips AP200S DECT with Quadro?
    By lunacom in forum Hardware Interoperability
    Replies: 2
    Last Post: 10-20-2009, 02:41 PM
  2. case for Aastra 142 sip dect phone
    By ccopley in forum General Discussions
    Replies: 1
    Last Post: 04-28-2009, 03:36 PM
  3. Using Snom m3 DECT phone with Epygi Quadro 2x
    By shagan in forum Hardware Interoperability
    Replies: 1
    Last Post: 02-08-2008, 01:47 AM
  4. D-Link DPH-C160S DECT handset
    By icstech in forum 'How Do I' Questions
    Replies: 2
    Last Post: 08-06-2007, 05:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •