Results 1 to 3 of 3

Thread: Deployment - Dial out timer

  1. #1

    Default Deployment - Dial out timer

    Hey there,

    I would like to strongly request that an alteration to all firmware revisions is made to the "DIAL OUT" timer deployment to the handsets.

    I believe that it needs to be removed from the handset and to allow the user adjust the dial out timer manually so they can set the dial out on an as needs basis.

    Or make it so that it is deployable on a handset by handset basis and you can adjust it at a whim rather than having to DEFAULT the handset so it then pulls the configuration, this is a pain when you are running static ip addresses and 2 x subnets over the same physical ethernet topology.

    Regards

    Kev

  2. #2
    Quadro Architect
    Join Date
    Jun 2006
    Location
    Around myself
    Posts
    2,075

    Default

    Kevin, sorry, but I don't get what you are talking about...

    Are you talking about the "Routing Dial Timeout" at the "Telephony"->"Dial Timeout" page, which is then set on the autoconfigured phones or about something else?

  3. #3

    Default

    Quote Originally Posted by davrays View Post
    talking about the "Routing Dial Timeout" at the "Telephony"->"Dial Timeout" page, which is then set on the autoconfigured phones?
    See my Aussie speak isnt that bad !!!

    You are getting better with it too.... now all i have to do is get you some good Aussie Vino to hit your door step... that might help your vocal chords !!!



    Kev

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. QISDN : T303 timer expired
    By hprieur in forum Troubleshooting and Problems
    Replies: 3
    Last Post: 12-11-2008, 05:55 AM
  2. Ireland dial tone.
    By paulk in forum 'How Do I' Questions
    Replies: 4
    Last Post: 11-18-2007, 07:54 PM
  3. Use Session Timer in SIP Line config
    By ssteiner in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 10-14-2007, 03:33 PM
  4. Configuration Deployment
    By riskdata in forum 'How Do I' Questions
    Replies: 1
    Last Post: 05-24-2007, 03:20 PM
  5. Enable Session Timer
    By lebenton in forum Tips and Tricks
    Replies: 4
    Last Post: 09-11-2006, 10:24 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •