Results 1 to 2 of 2

Thread: timed forwarding

  1. #1

    Default

    A customer requires timed unconditional call forward. Regular hours go to reception. After hours to AA using *4. The customer requests that this function should be automatic.

  2. #2

    Default

    You can achieve this result with the call routing table or using a custom VXML script.
    It might be easier to use the call routing table, so create two nearly identical rules in the call routing table for 00, and specify the date and time each is available so it matches your in hour / after hours requirement.
    During office hours, use the 00 call route to send the call to PBX-<Reception extension> and after hours send the call to PBX-00 (or whatever extension the AA is on).
    On your incoming trunks (FXO, ITSP) you need to set the call type to Auto-00 instead of PBX-00 so that the Quadro uses the CR table.
    I can't remember the exact screens to do this, but I can check when I'm back in front of the Quadro tomorrow.

    Cheers


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Call forwarding fails
    By Franz in forum Troubleshooting and Problems
    Replies: 6
    Last Post: 12-19-2012, 12:57 AM
  2. Call forwarding or divert
    By paulk in forum 'How Do I' Questions
    Replies: 1
    Last Post: 11-25-2007, 04:28 PM
  3. Three way calling for call forwarding
    By pdsguam in forum General Discussions
    Replies: 1
    Last Post: 06-07-2007, 06:33 AM
  4. Snom 320 Call forwarding
    By emssi in forum Hardware Interoperability
    Replies: 4
    Last Post: 04-12-2007, 02:07 AM
  5. Setup forwarding to mobile phone
    By dmaunder in forum 'How Do I' Questions
    Replies: 5
    Last Post: 03-21-2007, 10:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •