Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Remote Extension is not registration

  1. #1

    Default Remote Extension is not registration

    Dears Best Friends

    Excuse me because of my Language weak

    I Have Quadro 16x last firmware 5.1.18

    And I have problem with the remote extension

    I Use linksys PAP2T Adapter to Make call instead the IP Phone
    In the Local Area Network in my home it is working no problem but in the Out of local area network (( internet )) not registration

    I have this connection

    ISP ==> modem router linksys WAG160N (( BRIDGE ONLY )) ==> Quadro 16x With Lan ==> Laptop with IP 172.30.0.X Taking IP From Quadro and The laptupe Using ICS (Internet Connection Sharing) ==> PAP2T with IP 192.168.0.X Taking IP From Laptop

    I have dynamic IP but I Use dyndns in Quadro

    what the configuration To Make This connection

    What can I do in NAT Traversal Settings

    Please Can You Help me Step by step

    Thank You Very Much

    Faisal Al-Marri
    Last edited by almarri; 06-24-2009 at 12:28 PM.

  2. #2

    Default

    your Linksys device is sending to Quadro incorrect IP addresses in sip messages It`s a local IP address instead of global. Here is a part of incoming register message from your Lynksys pap2 device.
    **************************** SIP message buffer start *****************************
    REGISTER sip:fhm.ath.cx SIP/2.0
    Via: SIP/2.0/UDP 192.168.0.194:5060;branch=z9hG4bK-1ddd0806
    From: Faisal Al-Marri <sip:faisal@fhm.ath.cx>;tag=30d450abbdba255o0
    To: Faisal Al-Marri <sip:faisal@fhm.ath.cx>
    Call-ID: b23913ca-804d21bd@192.168.0.194
    CSeq: 48289 REGISTER
    Max-Forwards: 70
    Contact: Faisal Al-Marri <sip:faisal@192.168.0.194:5060>;expires=3600
    User-Agent: Linksys/PAP2T-5.1.6(LS)
    Content-Length: 0
    Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
    Supported: x-sipura, replaces

    ***************************** SIP message buffer end ******************************
    Last edited by askkur; 06-24-2009 at 01:01 PM.

  3. #3

    Default

    Thank You askkur


    OK What is the solution

    I think the NAT is solution

    but what is the configuration for NAT

    can you help me to config NAT Step by step


    Thanks again

  4. #4

    Default

    Let`s try to change some configuration parameters on Linksys, especially on System page
    https://www.mynetfone.com.au/media/s...ig/config.html
    check the DNS configuration, on SIP page
    https://www.mynetfone.com.au/media/s...ig/config.html
    try to configure NAT settings, on Line page
    https://www.mynetfone.com.au/media/s...ig/config.html
    check the "Proxy and Registration" part parameters, are they configured properly.

  5. #5

    Default

    you can use epygi STUN server stun.epygi.com. Port: 3478.

  6. #6

    Default

    what is the NAT address

    and ware I Put the stun.epygi.com and the port 3478

  7. #7

    Default

    On Linksys web gui "SIP" page under "NAT Support Parameters" section you can find that params.

  8. #8

    Default

    Here is a link how configure Linksys NAT

    http://www.voipvoip.com/linksys-pap2/

  9. #9

    Default

    I Making this are this correct



    but is not working

  10. #10

    Default

    do not fill port, remove port and save the configuration, also read the http://www.voipvoip.com/linksys-pap2/
    and change the listbox value as
    Attached Images Attached Images

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Remote Extension
    By HornetSoftIT in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 06-23-2009, 01:29 PM
  2. Remote Extension with no public IP
    By yobtrams in forum 'How Do I' Questions
    Replies: 3
    Last Post: 06-11-2009, 12:42 PM
  3. remote extension
    By dubnik in forum 'How Do I' Questions
    Replies: 5
    Last Post: 04-17-2009, 05:48 AM
  4. How do I force a SIP Extension registration?
    By grasonsupport in forum 'How Do I' Questions
    Replies: 1
    Last Post: 03-30-2009, 11:49 AM
  5. Quadro 2x extension SIP registration issue.
    By paulk in forum 'How Do I' Questions
    Replies: 3
    Last Post: 02-04-2008, 06:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •