Results 1 to 3 of 3

Thread: Call Routing giving me frustration

  1. #1

    Default



    Hi


    Have a 16X with two 6port FXO operating in slave to the 16X.


    16X sees all 4 local and all 12 remote trunks. I have three service providors which offer various rates.


    No SIP or IP calls, just want to figure out how to set up call routing so that


    when Users dials 916 or 926 use trunk X


    and when User dial 936 or 946 use trunk Y


    Thanks


    Scott



  2. #2

    Default

    Scott,

    If you log into the support portion of the web site, under Dowloads, we have a document there entitled "Call Routing Example 1." This should give you a fairly decent overview of how to configure call routing. Please review the document and post your results here.

    Thank you

  3. #3
    Quadro Architect
    Join Date
    Jun 2006
    Location
    Around myself
    Posts
    2,075

    Default



    Hi Scott,


    one small, but very important notice:


    if you have 10 or more FXO thrunks overall (and it seems you have 16), you will have problems with using FXO gateway thrunks. There is a bug in 4.0.7 (and lower) software, which shows up when overall FXO thrunks number is more than 9.


    But there is a workaround, which you can obtain through our technical support. I could post that here, but I am not sure on your level of familiarity with Quadro,... and this is a bit complex. If somebody is interested, we could post the workaround here.Edited by: davrays

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. IVR to call routing table
    By andy.collins in forum VXML Scripting on Quadro
    Replies: 14
    Last Post: 10-02-2007, 07:24 AM
  2. Prefix Tag on call Routing
    By nlucas in forum 'How Do I' Questions
    Replies: 2
    Last Post: 06-27-2007, 10:09 PM
  3. Call routing based on incoming DID
    By wesleyit in forum 'How Do I' Questions
    Replies: 3
    Last Post: 12-03-2006, 02:15 PM
  4. call routing to Voip provider
    By alraiky in forum Troubleshooting and Problems
    Replies: 0
    Last Post: 11-06-2006, 08:25 AM
  5. Send AA to Routing Table
    By in forum VXML Scripting on Quadro
    Replies: 0
    Last Post: 12-31-1969, 06:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •