Results 1 to 5 of 5

Thread: Call routing

  1. #1

    Unhappy Call routing

    Hello

    I have one Quadro 2x , but i create new Call routing

    i need to blocked all 06* numbers , i have multiple remote extensions, and one FXO port.

    I create one rule, i have enable, and up , but is possible to call any 06*.., this rule is for FXO port.

    I create one rule for IP-PSTN , but i don´t say in Destination Host

    Thanks for all.

  2. #2
    Quadro Architect
    Join Date
    Jun 2006
    Location
    Around myself
    Posts
    2,075

    Default

    Can you list all rules you have now in your Call Routing Table?

    If you want to be able to call to any number starting with 0, but which doesn't have 6 as the second digit, you can add a rule like this for FXO:
    pattern="0{?,!6}*" (or "0{0-5,7-9}*", which is the same), call type=FXO".

  3. #3

    Default

    thanks

    I need block dial to 06* numbers ,

    I have a 0 Call routing , to call for the FXO port

  4. #4
    Quadro Architect
    Join Date
    Jun 2006
    Location
    Around myself
    Posts
    2,075

    Default

    Ok, in that case you will need to remove the "0*" rule from call routing and add the "0{?,!6}*" rule instead with exactly trhe same settings: only the pattern should be "0{?,!6}*" instead of "0*".

    To remove the "0*" you will need to pass through "System Configuration Wizard", and select the "PSTN Access Code" = empty. This will delete the "0*" rule. Then you can add the "0{?,!6}*" rule.

  5. #5

    Default

    Yes. If different , but clear at this time work perfectly.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. call routing ..the best way ?
    By dolmen in forum 'How Do I' Questions
    Replies: 17
    Last Post: 09-21-2009, 09:37 AM
  2. Call Routing
    By cornepiek in forum 'How Do I' Questions
    Replies: 5
    Last Post: 10-02-2008, 10:24 AM
  3. call routing
    By mjnorris in forum 'How Do I' Questions
    Replies: 1
    Last Post: 04-20-2008, 09:25 AM
  4. IVR to call routing table
    By andy.collins in forum VXML Scripting on Quadro
    Replies: 14
    Last Post: 10-02-2007, 07:24 AM
  5. Prefix Tag on call Routing
    By nlucas in forum 'How Do I' Questions
    Replies: 2
    Last Post: 06-27-2007, 10:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •