I’m working in a project where I’m using a Quadro E1T1 as
gateway for a PBX HiPath4000 of Siemens
We have problems when someone IP
phone or the phone directly connected to the Epygi try to make a call to the PBX
HiPath4000. The calls in other direction are working
done.

I reviewed the logs and the calls
statistics. In the call statistics we saw that the calls to the PSTN all had
“Temporary Unavailable”, and in the logs I saw a this message “Network Timer
0x20 timeout TRUNK - 0, TS - 31”
The E1 is PRI, (CCS). Is threre an especial configuration for the Quadro to work withe the HiPath400ThanksBest RegardMarco