Results 1 to 5 of 5

Thread: Call Block problems

  1. #1
    Junior Member
    Join Date
    Jun 2007
    Location
    Coral Gables
    Posts
    1

    Default Call Block problems

    Hi,

    I have a problem blocking calls. I have to block all calls to cell phones
    example all starting with 6* and 5*. but there is a list of allowed numbers
    (just a few) starting with 5 and 6 that they would have access.

    I'm using PSTN FXO lines.

    Does anybody know how to do that?

    Thanks a lot for your help.

    Regards
    Jesus Crespo

  2. #2

    Default

    i have the same problem.

    Thanks

  3. #3
    Quadro Architect
    Join Date
    Jun 2006
    Location
    Around myself
    Posts
    2,075

    Default

    Let me understand first, to provide a correct answer:

    Do I understand right, that you want to block outgoing calls from internal extensions to those numbers?

    Also do you want to block those calls only from one-two extensions (in that case you can use "Outgoing Call Blocking" service on extension), or calls from all extensions in the system (in that case you'll have to put those rules in the CRT)?

    Let me tell also , that this is perfectly achieveble, so if you answer to my questions above, we could give you a solution.

    Best regards,
    David

  4. #4

    Default

    I need to block outgoing calls from internal extensions to those numbers
    6* 5*

  5. #5
    Quadro Architect
    Join Date
    Jun 2006
    Location
    Around myself
    Posts
    2,075

    Default

    Ok, then see the http://support.epygi.com/forum/showthread.php?t=1588 for the answer.

    Best regards,
    David

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Problems With Wan Port
    By 361phil in forum Troubleshooting and Problems
    Replies: 1
    Last Post: 04-28-2008, 08:02 AM
  2. Problems with 4.1.50??
    By nlucas in forum General Discussions
    Replies: 1
    Last Post: 01-21-2008, 05:38 AM
  3. Problems with Grandstream IP Phone
    By quadro2net in forum Hardware Interoperability
    Replies: 9
    Last Post: 12-31-2007, 10:17 PM
  4. FXO 3 and 4 problems
    By viptelprueba in forum General Discussions
    Replies: 3
    Last Post: 04-11-2007, 10:46 PM
  5. Problems with Polycom 301
    By jchavez in forum Installation
    Replies: 4
    Last Post: 08-17-2006, 07:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •