Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Linksys SPA 9xx phones

  1. #1

    Default



    Do you plan to support theses phones?


    regards,



  2. #2

    Default

    Currently we do not have nay plans to re-certify the Linksys phones. At present we fully support Aastra and Snom. Recently added to the list is Grandstream and Camrivox. The next manufacturer we will begin to refocus on is Polycom. We have basic support for older models today, but we plan to begin the certification of the new SoundPoint models (IP 330, IP550, and IP650). I do not have a completion date yet. I will update the post once I have a firm date.

  3. #3

    Default No more manufacturers?

    And what about Thomson ST2030?

    Thanks and Best Regards

  4. #4

    Default

    Thomson ST2030 phones are in Epygi Tested Phone's list and we support Autoprovisioning for that phones. If you'll go to "Telephony -> Line Settings -> IP Line Settings" page, then you can choose that model from the drop-down list of Epygi supported/tested IP-Phones. You can find more documents about Thomson phones' configuration and usage with Quadro in our WEB, in the "Channel Portal Login -> Support Documents -> System Configuration" section.

  5. #5

    Default

    I really think it would be nice to Linksys provisioning in there as well, I find the stock Linksys phone and entering Username and password seems to do the trick for me, but it would be nice to have the epygi do it. Since all the config files are somewhat simalar may not be too much of a strech to modify the old 841 Configuration.

    Z!

  6. #6

    Default

    It would be perfect to support all the IP-Phones in the world At present our main focus is on Polycom phones, as Worren Sonnen have mentioned. Maybe the next phones will be Linksys, don't know. We need to examine that phones and their config structure before deciding something. There are definitely some differences between different models of Linksys phones, as there are not only IP-Phones, but also phone adaptors, that we might support as well.

  7. #7
    Member
    Join Date
    Nov 2006
    Location
    Melbourne, Australia
    Posts
    34

    Default

    I understand the problem with supporting so many phones, but since you already support one linksys/sipure phone, there would be very little work in supporting the others, as the deployment process is completely identical, except for the default filename they look for that has the model number in it eg spa962.cfg etc

    Supporting the spa962 would be fantastic, this is a great phone with the Quadro. I would really like to know it is at least on the roadmap.

  8. #8

    Default

    Please turn to Warren Sonnen directly, maybe he has some update regarding Linksys phones. You can find his contact detalis above in this thread.

  9. #9
    Member
    Join Date
    Nov 2006
    Location
    Melbourne, Australia
    Posts
    34

    Default

    These phones are actually quite easy to make work. you just setup them up in the Quadro as Sipura841 and enter the MAC address as normal.

    Then you then need to go to the Provisioning tab on the phone and set the Profile Rule to /spa841.cfg and then reboot the phone, that is it. The phone will then be auto-provisioned from the Quadro. This will work for any linksys model.

    FYI For Epygi to support them out of the box, they just need to return the same config file if the required file name is spa???.cfg. this would then work for spa801, spa822, spa842 and spa862.

  10. #10

    Default

    Thanks for the provided workaround. Hopefully this will not harm the phones autoprovisioned by Quadro.

    Quote Originally Posted by dmaunder View Post
    FYI For Epygi to support them out of the box, they just need to return the same config file if the required file name is spa???.cfg. this would then work for spa801, spa822, spa842 and spa862.
    I think it's not so easy. To declare a phone as a Epygi Supported or Tested phone, we must have them in our lab to check whatever they conform to our rules for IP-Phones support and how they go with the Quadro features. Yes, in the way suggested by you we can easly add an autoprovisioning for them, but it doesn't mean that thay will support Quadro Feature Codes. I don't know the differences of spa801, spa822, spa842 and spa862 phones, but I'm sure there are some differences between these models, so we need to perform some testing with them in our lab before declaring them compatible and recommend with Quadro.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Linksys SPA962
    By GAZZA70 in forum Hardware Interoperability
    Replies: 10
    Last Post: 01-29-2009, 03:03 AM
  2. Support for Linksys SPA-941 IP-Phones
    By lebenton in forum Hardware Interoperability
    Replies: 24
    Last Post: 10-07-2008, 07:48 AM
  3. Linksys SPA962 SIP Phone compatibility
    By shagan in forum Hardware Interoperability
    Replies: 4
    Last Post: 09-10-2008, 10:46 AM
  4. Linksys Sipura 942 / SLA Support
    By inncam in forum 'How Do I' Questions
    Replies: 1
    Last Post: 05-01-2007, 11:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •