Search:

Hi there, I am having a problem with matching an inbound DID number and routing it to an extension. If i leave "route all incoming SIP calls to call routing" un-ticked, all calls go through to the...

Hi Guys,

is there anyway i can set up OPenVPN on this box with the firmware i have in place? or is there latest firmware which is not on this site?
i have a client that has 2 x Yealinks at...

Hi,

I installed a QX today and i am having a problem with dialing both extensions as well as though the ISDN.
you can dial an extension 10 times and it is successful 4 out of 10 times, when it is...

I am hoping someone can shed the light on this very strange issue.
This system has been installed since last year October with no issues. 3 weeks ago we started with inbound jitter which is really...

Hi Zet,

THanks for replying. Yes, i also tried that.... ? im at a loss for words.

Hi There Guys...

Please can i as you for advise...
I have a Yealink T28P swb phone that resets probably once a week. I have done the following:
1. Upgraded the firmware to 2.70 (didnt make a...

We have the above Systems sitting on each side of a wireless controlled be a Microteck router.... At the moment we cannot get them to dial each others extensions... they can dial the internal...

All Dip switches are set to NT. is this not correct? they are making calls - but my issue is out of 45 calls made in an hour 22 have be unsuccessful....
with regards to "account code", i mean that...

Good Day.

Please can i have some assistance? i have a client that i am having endless issues with outbound dialling. Unsuccessful call stats say the following "Temporary Unavailable"
ISDN :...

Hi There,

I have a Quadro 6L that has been installed at a client now for just over 1 year. Recently, they are having a problem where all of a sudden all calls have a 3 - 4 second delay on all...

THanks so much guys. It ended up being my sip provider.

Hi please help?

My client has a Panasonic swb with 2 x 4 Port Quadro ISDN Gateways connected to our sip providers euipment. Its configured that 1 gateway is for incomming calls and 1 gateway is...

Hi Kevin,

Just to let you know i have been running a yealink T28 and T20 on my M12 and they have worked absolutely fine.. Can transfer, pick up call ect...
I dont know if anything has changed,...

Hi there,

Please forgive me if this has been covered, but i cannot find it anywhere! I have set up my extension for the QCM under my line settings (selected QCM under phone model -> selected...

THanks so much... thats Brilliant. I will do this.
Much appreciated.

Hi there,

i have a client that has many speed dials that dial out to cell phone numbers. they would like me to prevent all unauthorised calls that are not going through the speed dial list. but...

I have a client that has Snom phones as well as analogue phones. I would like to know if there is any way that they can unlock the phones when they come to work and then lock the phones when they...

My Service provider???? am i being blonde?? They have now said the following: - "It rejects the call, Because it lost registration, Its a security issue to allow connection to be established without...

Hi there,

I have a client that seems to have many calls going through our IP - PSTN (Voip provider) that are comming up as "request rejected". They are saying that the Device (Quadro M26Xi)stopped...

thanks Kevin.

Hi there,

i think i have it right on the Iphone. please can you let me know how i register on the Quadro?

When installing iether ISDN or FXO lines on the Quadro and not using all ports. Firstly i disable the ports that are not being used. When programming my call routing , i say use any port??? is that...

Hi there,

Please can i have some help in understanding why i would get the below. (in telephony terms?):
1. "temp Unavailable"
2. "Request rejected"
3. "Check your external telephone...

Hi There,

I have a Quadro 6L installed at a client and currently have 4 FXO lines attached to ports 1-4 (enabled). Ports 5 and 6 are disabled. when i look through my line status FXO 4 is saying...

Thanks so much... Much appreciated... I will give that a bash.

tx