Search:

I have a Siemens S685 remotely to my phone system.

It has logged on fine, and can receive calls fine, but it can not dial out.
If I look in the unsuccessful call logs, then I can see it...

I have found out today that someone has hacked our system and been making outgoing calls costing us around £70 per month... I have an IP address, which I am now blocking and have blocked...

IS there now a TAPI interface, or a Goldmine integration?
Thank you.

Dominic

I was hoping the 'call transfer' bit at the bottom may help...

Here is another issue for you with these otherwise good phones.

Have you tried the S450with a headset?
When you plug in the...

Potentially I am looking at getting DDI's in a couple of other countries.

Primarily the US and also Australia... do you think it is best to find a SIP Trunk provider local to that country and rely...

Here is a quick screen shot of the new options, but I don't think this really helps - as said before - I have been told the best thing is to get as many people to put in a request through their...

OK - spoke with Siemens and IT DOES NOT do re-INVITE or REFER.. the ONLY 'sort of' hold you can get is to hit the button that says INT (as if you were going to transfer to another handset on the same...

Well the bad news is that even on the latest version of firmware (020810000000/041.00) the Siemens phone does NOT HAVE a special key for Hold / Transfer

The soft keys go to Ext (which will allow...

Indeed you get a refresh LONG before it has had a chance to connect. Press f5 in your browser to refresh.

I do have issues with mine sometimes if I do a power cycle - I am set up as a remote...

http://www.ppvote.com/epygi/phone.jpg

QCM - 4.1.7Quadro
Boot loader: 3.1.31/Release
Firmware Version: 4.1.28/ReleaseAlso is it possible to run QCM on the same extension as you have a hardware phone on so that you can use QCM to manage...

I put QCM on my machine before the keys were registered on the box and the trial period expired before our install company updated it.

Now there is no audio controls under the dial button, and if...

Sorted on this one. Our tech support managed to check the logs when I dialled and found that my phone was pre-pending my local area code on VoIP calls, which was causing the problem.

I have a Siemens Gigaset S450IP at home and we have a 16x in the office. The phone is connected over the internet and people in the office can dial me fine, and can transfer calls to me.

I can not...