Search:

Have been told by my ISP that the Quadro is the possible cause of slow speed and want to try and diagnose the issue.
Am using a Quadro 2x2, old I know but suffices for the purpose of the company.
...

Have users that connects a macbook on the LAN and uses it as an access point for their phones.
Is it possible to configure the quadro 2x2 to block just the use of the access point??
I dont want to...

After a change of the WAN IP address has caused numerous problems with some phones and system in general.

1. can no longer make calls to extensions
2. Can not transfer calls of course
3. Codec...

Need to purchase new phones for our office and need some advice

Will need a four exec phones and others can be entry level.
Looking at the following GRANDSTREAM GXV3275 for myself simply cause it...

What am I looking for in specific, as the RTP settings have no IP address field.. Anyway I just went thru each codec and made a slight change and saved hoping it will flush any previous settings but...

Yes was a WAN IP change..

Have a single phone which was working fine before a recent IP address change.
Now the phone for both incoming and outgoing calls the phone is not receiving the voice from the other end.
For example...

ids log is there another name cause I cant find anything in a search for a custom log

I also have a similar problem, all IP lines are assigned and active but have two phones that do not register.
All phones are ATL Berkshire 5000 and although old are supported.
It appears to be only...

Have an issue which is not easily replicated with an incoming call.
1. AA directs the call to a virtual MER extension
2. rings 4 local extensions
3. on answering just get the dial tone of an open...

Hi

I need a consultant that is in Japan to do a simple configuration of a Quadro 2xi.
Anyone know someone would appreciate leads prefer to deal with an individual rather than company if...

Hi There,

Can anyone help please?

Cheers,

Matt

HI there,

trying to configure IQALL on a quadro cs.

would be grateful if i could get an example of call routing table and the other configs (Step by step configuration would be very...

Hi

I have a AA setup which auto transfers incoming faxes to a virtual IP line (20).
Problem is the call gets transferred but the error is
FAX NUMBER : +331799936XX
FAX ID : FREE1684642
PAGES...

Is it possible to backup the config of the 4xi model and then upload that backup to the 2x2 model??

Yes we dont use any other NAT device but the issue still exists...
Has no consequence if u use the filtering rule or not the issue seems to be somewhere else..

Anyone else can help please??

Under firewall configuration NAT is enabled.
The WAN IP is 41.86.56.43 and the LAN is 172.16.32.1.
The PPTP configuration of the server(Quadro) is 172.16.32.0 subnet MSCHAP

PPTP connections see...

No the IP address is used not a domain name (WAN interface IP which is a static ip address)
Is using NAT but the filtering rule is already done
Enabled PPTP Pass-Through Allowed Any ...

Have started a VPN PPTP server connection on the quadro but when client (windows 7) tries to connect get the below error..

"Received Error 868" The remote connection was not made because the name...

The path of the call for this issue is PSTN (from an IP phone) to pstn (landline and mobile).
The IP phone is a Berkshire 5000 and software firmware on the Quadro 2xi is 5.3.22

Are there...

I need to create a routing rule for a DID that all incoming calls will be sent to extension 30.
Usually do this by setting the destination of the DID at the DID provider site but in this case the...

Have an old model Quadro 4xi which I want to use for an analogue setup.
Do I need an Analog/ISDN Converter for each analogue line coming in?

I assume I do but just want to check before spending...

Have setup a guest wifi network using a second router acting just as a AP with 3rd party firmware DD-WRT.

Problem is assume the firewall is blocking access to the internet.
The guest network is...

Have an fxo line which is routed to a fax machine.
What I want to do is if the call is not a fax then to reroute to another extension...

Is this possible??

Had an electrical storm last night and now the LAN port indicator light is off and can not access the device.. Was using a surge protector but something went wrong I guess...
Would have thought a...