Search:

hi there lee.

im glad you got it working

you can contact me anytime for any more questions

hi there Lee.

can you please explain exactly the procedure you followed to get this up and running.

i have done it before, although a long time ago. maybe i can help you.

this problem seems to be related to my other post regarding the FXO and isdn unit that keeps deregistering. once the unit deregisters it loses the related routing table entries. i then have to reboot...

hi there

i did as you suggested

i first downgraded to a previous version. it started to do the same after a week

i then went back to the latest firmware version and redid the entire config....

hi all

i have a very annoying issue on one of my quadro 16xi's
on this unit i have a 6fxo gw and a 5 isdn gw

the main unit is on fw 5.1.39
the fxo gw is on 5.1.13
the isdn gw is on gw 5.1.14...

yes Kevin i have done that
also in reverse.
i have also upgraded form 5.1.30 to 5.1.39 in the main unit to see if that will help.
this thing was working perfectly up until about 2 months ago and i...

when i click on the 00 route, it takes me to ext 00 auto attendant settings.
the 00 auto attendant is being used for normal day service.

Hi all

i have an external 6 port fxo unit sharing lines to a quadro 16xi unit

the fxo unit is on firmware 5.1.13 ans the quadro 16xi is on 5.1.39

my problem is as such
wheneveri setup line...

there was talk of a little windows app to do audio streaming with. is it available yet, and where do i get it


also how do i setup the audio streaming

system/user rights mangement

any news on the fabled 5.1 release yet

there is an easier way, get a bluetooth headset with a dongle for yer pc, setup xlite on yer pc as yer phone, use the bluetooth hedset like that. you can get the long range dongle that will enable...

no you dont understand, call routes 11-69 is not for the exts.
south african area codes are 011, 012, 013, 014, ... 065, 067, 068, 069 and 080, 081, 086, 087, ... 099

11-69 is not the exts but...

just remember that the free version of x-lite uses the PCMU g711u codec.
if bandwidth is an issue you will need to purchase the full version of x-lite which has the g729 codec included

i would remove the 0* rule all together.

the one i am referring to is as follows
Pattern: 00{11-69,86-99,80,81}*
Pattern Modification; NDS:1
Call Settings: FXO...

i see

are you using the cdr data from the qudro or are you using the radius facility

ah

i forgot about that one
that would have to change to "00{11-69,86-99,80,81}*" NDS:1

this will then give access to all areas excepting the cell ranges

dave has the correct way of doing it. but since darryl is in south africa the pattern should actually be "0{71-85,!80,!81}*". from what he said, he has only one cell router. our lovely country has...

you currently have that specific route setup to route to "any port@172.30.30.2" which will be all ports on the GW

to have it show what you want you need to setup the same route to...

What would be causing this to appear??



Codec: PCMU, Quality: 1 (excellent)
PSTN call
Close Reason: ISDN : Release from Layer2

give the epygi a dyndns account and use the quadro.dyndns.org as you proxy

you can make calls, but you cannot recieve.

im just throwing a stone in the bush here

i had the same problem and it was actually a simple rule in the routing table the cased the problem
...

you can do what i do.


wait for the 5.1 firmware release to change the auto provision settings that the quadro sends down.

i believe that we will have limited access to such a facility

in your Attendant Scenario you can set a redirection on timeout
enable the facility
set 'Recurring Attendant Prompt Repetition Count' to 1, as you want the message to be played only once
call type...

go to 'users/Extensions Management'
click on the desired ext you wish to create a MERG with.
go to 'Supplementary Services/Caller ID Based Services'.
for a general setup simply click on 'any...