Search:

Hi,

Our quodroISDN is sitting between our ISDN PABX & the ISDN boxes

when I dial "0" to get an outside line from PABX , I got redirect to the quodroISDN autoattendent and the voice menu pickup...

can I use the standard SIP port for the tunnels? I got the tunnels establish between the 2 Epygi devices. When make call and route thru the tunnel, master device said timeout but the slave device...

Kevin,

To allow SIP tunneling to work, is there any requirement? e.g. it works with LAN port only? (based on your previous post - lan side of the master Quadro). i.e. not from the WAN port?
...

System back to normal suddenly.

Thanks Kevin.

Thanks all, the latest firmware did solved the problem..

it happened to 2 different VSP accounts - all monthly accounts, i.e. we paid later... checked and there're no outstanding payments.

The system log fill up with the following strange messages......

My E1 gateway suddenly got a strange error, no one can dial out via VOIP while all SIP connections are successfully registered and the entry from the unsuccessful outgoing log is: "Temporary...

hrant,

Thanks for your post.

we have 2 sites and are using Quadro VOIP gateway (QuadroM, QuadroISDN - both connect to Panasonic PABX) we would like to using the WAN link (VPN with no ports...

I use an existing VPN tunnel between the 2 sites and attempt to establish a SIP tunnel using the VPN via the WAN port (like on the LAN). This eliminate one of the potential problem with port...

I updated the unit to the latest version of firmware and so far so good.

thanks everyone

the 2 Quadro (QuadroM2 E1 & QuadroISDN) are all behind firewall (connection detected symmetric NAT), I'm going to setup SIP tunnel between these 2 VOIP gateway so calls can be routed between them.
I...

Hi,

What did I missed on connect QuadroM2 and QuadroIDSN connect via SIP tunneling (both behind NAT firewall)? e.g. Firewall ports need to open or forwards? Should I use port 5060 or other?

*...

when a user make a phone call thru PABX using the VOIP gateway, ocassionally you can hear 2 call progress tone overlapped, after the call established (e.g. one call progress tone gone), the called...

pls ignore this

Kev,

By the way, we download a new firmware that seems fixed the timing problem (see below).

Boot loader: 4.1.7/Release
Firmware Version: 5.1.4GW/Release

However, when a user make a phone...

Kev,

If it's a timing issues, is that problem relate to Epygi or Pana? can a Epygi firmware update will resolve the issue or this is a problem with Pana?

Also, what would be the optimum timeout...

kev,

Thanks for your message, I wonder if you can give us some clue.

We having a communication problems between Panasonic KX-TD500 and Epygi dual E1 gateway (1 connect to telecom, 1 connect to...

Hi,

Boot loader: 4.1.7/Release
Firmware Version: 5.0.21GW/Release

Can anyone advise me if this is the latest firmware for QuadroM (dual E1 VOIP gateway)?

Also, anyone knows someone in...

Artur,

Thanks.

Hi,

What do I need to do to route inbound SIP call to:

1. E1 interface from a Internal (or external) SIP server (e.g. Trixbox)? The E1 gateway has assigned (and registered) an extension in the...

Davrays,

Thanks for your message..

I would like to establish a call routing rule to allow any number prefix with '#' dial go thur the E1 instead of using SIP (e.g. FAX). I got an error when I...

Hi,

How can I setup a call routing in QuadroM E1 say if I prefix a dial number with '#' (or any symbol instead of a number) then it'll pass thru to the E1 channel (PSTN) instead of a SIP channel? ...

Thanks KSComs and DavRays. I will ask the local distributor for assistance about the E1 setting.

questions: Can I configure a SIP device to register to the Quadro IP gateway as an extension so we...

Hi all,

* I'm current setup a Quadro Dual E1 and wondering if anyone can help by suggestion the E1 setting (Australia).

* I already setup the WAN interface and now want to setup the call...