Problem solved!
Create a new route, use on page 2 (Routing Call Settings/Edit Entry) ITSP login name and the password but UNTICK "Keep Original Caller ID ".
Finish and go to Edit Virtual extension...
Type: Posts; User: valex
Problem solved!
Create a new route, use on page 2 (Routing Call Settings/Edit Entry) ITSP login name and the password but UNTICK "Keep Original Caller ID ".
Finish and go to Edit Virtual extension...
Hi,
I have M32 with the couple of trunks operating fine for many years. Recently i obtained local trunk to cover some unreachable countries.
I set it up as usual and it registers on their server,...
Solved....Virtual line to my Voip provider (incoming number holder) go to Supplementary Services/Caller ID Based services then click on "Unconditional Call Forwarding" Enable it and edit to route to...
Hi,
Have a couple of problems but let's start with the strange one.
My M32 was working flawlessly for more then two years until recently..suddenly it could not connect to one of my PSTN...
Hi,
Now i have attempt to register the line every second and it is still not automatically blocked..
So obviously something is not working correctly.
Most of the time it does but sometimes i...
Hi,
Ok attempts to register the line are made every 30 seconds to couple of minutes lasting for 3 hours..so those are not blocked automatically?
Regarding manual adding of IP i know that you have...
I have a similar problem which puzzles me. So far i had two attacks trying to log in as a remote phone and M32 failed to put them in the beaned IP list, so they kept trying for hours. At all other...
At the moment i am using Grandstream 5024 and the set-up is substantially different..
Now I want to switch to Epygy Quadro M32 and so far i lost a lot of time to do it right..managed to understand...
I have M32 and i want extension in format 7xx. I can leave it as default length of 3 (xxx) but i can't add prefix in that case...Did reset, default length is 3, but prefix field can be used only if...
Access enabled. Thank You!
I do have an account since last week, but I don't have access to the documentation and firmware updates.
I just received 2X and tried its serial but obviously previous owner registered that number....
What i can do if i have a product bought on eBay, and registration attempt refuses serial as already reserved?