Search:

call routing, add new entry
pattern = *
call type=ip-pstn
metric=10
description=call sip from pot
tick filter on call/etc,
hit NEXT
fill in your sip details, eg host, port, username, password...

sure - it's the same old standard DHCP.

Here are the settings that the quadro gives out by default (they are in ISOC-DHCP 3 format, but you can see the values you need to set):

subnet...

Sergio's solution worked in my call routing ok, the only difference I had was IP-PSTN in the call type.

I wish this would work for me, but my ITSP (Mytel) blocks the outgoing CID - I need to pay...

The DHCP options of the quadro could be disabling netbios over tcp. This is worth a shot on two workstations to see if they will communicate, before you do it on all:

network adapter properties,...

thanks, I have tried a couple of configurations now.

I have checked my SIP logs and and it seems that it is the SIP provider not giving me the dialed DID. They use asterisk, and it seems to be...

the first figure represents the time since the last reboot, the second figure is how much of that time has been spent idle.

Both are in seconds, so if you /60/60/24, you get a figure in days.

Hoping someone has conquered this and could lend a hand..

Using a quadro 16x, and a handful of DID numbers hooked to one SIP extension, how would one go about routing to PBX extensions based on...