I have a call transfer issue with a Quadro M8L on version 5.2.40 with Snom 300 (some on 8.4.3 and some on 8.7.19) and a Snom 870 on 8.7.19. Have 6 FXO incoming lines.
The transfer problem is that...
Type: Posts; User: flyboy_dea
Call Transfers Disconnect Immediately
I have a call transfer issue with a Quadro M8L on version 5.2.40 with Snom 300 (some on 8.4.3 and some on 8.7.19) and a Snom 870 on 8.7.19. Have 6 FXO incoming lines.
The transfer problem is that...
Great idea, I have done this for other situation...
Great idea, I have done this for other situation but just did not think of it for this particular instance. Thanks Ashot.
Add Rings Before Auto Attendant Picks Up
Client with an M8L and Broadvox service, is currently using the default Auto Attendant setup. When callers dial their main office number, the Auto Attendant picks up right away, usually with out any...
This is a small installation only 10 phones to...
This is a small installation only 10 phones to start with and I have a 3-4 days until installation begins.
I am trying to get a feel for the better or preferred configuration setup on a fresh...
VLAN or DMZ
I am looking for your opinion on setting up an Epygi M8L. As this is a new installation I am wondering if it is better to put the PBX on a DMZ or on a VLAN. We are using a Sonicwall NSA 240 and I...
Thanks I will try it.
Thanks I will try it.
Setting Work Hours for Specific Day
I have adapted a custom VXML AA script but I am having trouble setting the datetime for Friday work hours to 8-Noon and then 1:00 to 4:30. M-Th uses the same code but the last half of the day is 1...
VXML with Half Hour Time Period
I have adapted a VXML AA script from Epygi and a post on the Forum but I am having trouble setting the datetime for Friday work hours to 8-Noon and then 1:00 to 4:30.
Here is the snippet that...
To configure the phones we did the following:
1....
To configure the phones we did the following:
1. Ensure phone was set to factory defaults.
2. Configure an IP Line to an Extension with MAC for the phone.
3. Then for the Extension selected...
Thanks for pointing out these documents.
After...
Thanks for pointing out these documents.
After following the documentation and a lengthy attempt to get the auto-provisioning to work on the WAN side of the Quadro, it came down to having to...
Configure Quadro M8L and Phones to have Phones on WAN
I have looked all over and found many references to how this might be done, but most of the references were 3 to 4 years old.
How do you configure the Quadro M8L (5.2.40) and the Phones so the...
HotCall with Quadro M8L
Although it is not listed in the HotCall documentation, does anyone know if the Add-in will work with the Quadro M8L?