Search:

I have PbX QUADRO 2x and 16x (FW 5.3.26/28) and Telephone Mitel 6865i (FW 4.2.0.2023). The Telephone is registred as internal extension. Outgoing internal and external calls from this extension is...

Hi Vahan,

Thank you very very much. This information I was missing me, that QCC is using "Phone Access Password". Now it's clear.

Regarding the first problem, I'll go back to him soon after...

Hello Vahan,



I agree, the problem is very strange.



Quadro login from the LAN side is ok, if the WAN is disconnected.

Hello Kevin.

The problem is in version 5.2.28. After downgrade firmware back to version 5.2.12 is a solved problem. Thanks for your interest.

Best regards,

Pavel

Hello Kevin.

What is meant by everything? Remote Access worked without problem for three years, in all firmware upgrades of Q2x, and now, without configuration changes, is a problem. Please, you...

Hello Kevin.

QUADRO is connected direct to public IP address.
QUADRO make available an interface to enter the Username and Password. By enter the wrong password immediately gives the message:...

Hello. No reaction? So please again. When I enter by the remote access IP address of QUADRO into my browser, I put a right Username and Password and waiting ... After about 2.5 minutes browser page...

Hello.
Lately, I have a problem with access to Q2x from the QCC and also directly from the web browser. Q2x is in the status "Available", after selecting an IP address from the browser Q2x goes to...

Hi, David,

the document "Epygi Technical Training 120: Hardware Overview" shows in picture number 6,7,8,9 for the PbX QUADRO 4x, 4xi, 16x, 16xi: Manufacture discontinued! Is this information...

Hi,

Thank you for your response. What a pity, it is a perfect function for all QUADRO PbX.

Pavel

Please, where to look "Full VLAN support for IP Phones (multiple subnets/DHCP)" for QUADRO 2x4x16x, version 5.2.9?

Hi, David

Please, I have the question. Is in the new version 5.1.38 fixed the problem with Incoming Traffic / Port Forwarding? Can we put it into our systems Q16 and Q2?

Best regards,

Pavel

Hi David,

is it possible somewhere find a complete list of *. wav messages of system QUADRO, the chance to play them and then as needed to replace one? For example, in another language or tone.
...

Hi David.

It is a very good idea, I think. Especially for international calls. Much depends on the price.

Best regards,

Pavel

Hi, David,

Thank you for your important informations. Yes, we have port forwarding and translanting as VNC and tool for equipments on LAN of Q16xi. I got in June (last year) special version of...

Hi, David,

Thank you very much for the practical links. I will follow this line.

Best regards,

Pavel

Hi, David,

I have at this time same problem with other QUADRO16xi version 5.1.31 (our customer) with function "port forwarding and translating".

For remote access we need for example:...

Please, is it possibility connect QUADRO PbX to Skype net?

And happy new year for all!!

Hi David,

thank you for your response. So you really work?

My Customer has Grandstream GXP2000. This equipment has lamp-field by buttons. But "*4" is Dial-function only, not a Status-function...

Hi,

is there any possibility of status-indication of Extension, whether currently is active or inactive unconditional forwarding (after repeat function *4)? For example, change of tone and so on....

Hi,

my personal experience:
Videocall is from version 5.1 without any problems for Q2/Q4/Q16. Only it is necessary to turn ON (Enable) the codecs H.264 or/and H.263 in the menu "Codecs" for...

Hi, David,

thank you very much for your help. The problem now resolves Technical Support department.

Best regards,

Pavel

Hi, David.

Thank you for your good message :)

Best regards,

Pavel

Thanks for your information. And types Q2, Q4 and Q16??

Hi, Kevin.

Thank you for your answer. And when will it prepared for use, do you know?

Best regards,

Pavel