View Full Version : P-Asserted-Identity not passed through Qx50

06-13-2018, 03:27 PM
A couple of months ago, I posted a similarly named thread (http://forum.epygi.com/showthread.php?5155) on the Quadro -> 'How Do I' Questions (http://forum.epygi.com/forumdisplay.php?17-How-Do-I-Questions). Since then I was able to try this on a Qx50, and the issue remains even on its' newer SIP stack.

The PAI text will not be passed through to any SIP UA, since it is discarded after it is received by the Epygi SIP stack, even on Qx50 running 6.2.11.

Any ideas if we can change some setting for the PAI text to be passed along to the SIP UA?

Thanks in advance.

20:23:50 Receive SIP message # (13/06/2018 17:23:50:469 GMT) # UDP # 534 bytes # buff size 1 # from: 195.xxx.16.xxx:5060 # to: 192.168.xxx.253:5070

***************************** SIP message buffer start *****************************
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 94.xxx.205.xxx:5070;branch=z9hG4bKEPSVBUSb84f90cc-431f-4304-a2a5-c96d2c32a1c4;rport=37454
Call-ID: 9380092611081346_b4d35c63-58fa-4291-b170-fc309f3113b6@localhost
From: "IonT"<sip:+30210xxxx151@ims.potenet.gr>;tag=1528910081464a6615-8ce4-4726-b726-34de76debe4a
To: <sip:215xxxxx03@ims.potenet.gr>;tag=sbc0505cs1zfyn6-CC-70
CSeq: 577 INVITE
Contact: <sip:195.xxx.16.xxx:5060>
P-Asserted-Identity: "First Last Name"<sip:+30215xxxxx03@fmc.itsp.com;user=phone>
Privacy: none
Content-Length: 0
***************************** SIP message buffer end ******************************

20:23:50 TLayer::IsSelfReqResponse # self unique str in via EPSVBUS
20:23:50 TLayer::MsgToTU # Msg type: 180 # TID: 34 # DID: 33
20:23:50 SipSessDlg::Inc1xxProc # Got 180 message # OID: 33 # SID: 9380092611081346
20:23:50 UA --> CM # Ringing # media not exist # SID: 9380092611081346
20:23:50 CM --> UA # OnRinging # Media not exist # OID: 32 # SID: 6566621150062515678
20:23:50 Try to send SIP message # (13/06/2018 17:23:50:478 GMT) # UDP # 408 bytes # buff size 0 # from: 192.168.xxx.253:5070 # to: 192.168.xxx.110:5060

***************************** SIP message buffer start *****************************
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 192.168.xxx.110:5060;branch=z9hG4bK926322680
To: <sip:x215xxxxx03@192.168.xxx.253:5070>;tag=152891008190ba95e8-0e4b-44f5-9bfa-46afa4d25085
From: <sip:locext_09@192.168.xxx.253:5070>;tag=558350587
Call-ID: 8_1893945744@192.168.xxx.110
Contact: <sip:x215xxxxx03@192.168.xxx.253:5070>
Server: Epygi Quadro SIP User Agent/v6.2.11 (QX-IPPBX)
Content-Length: 0
***************************** SIP message buffer end ******************************

06-19-2018, 12:21 PM
Since there was no reply from anyone of the usual knowledgeable forum members, the following questions are addressed to the Powers at Be:

• Is there a hidden setting somewhere, which will allow the P-Asserted-Identity text to be passed to the SIP UA?
• If there is no such setting / switch, does this qualifies as a bug, since it's on the latest version of firmware?
• Should it be reported somewhere else in order for it to be looked at?

Thanks a lot for your help.

07-03-2018, 06:33 AM
Is anyone from Epygi's staff monitoring this forum, like they did extensively in the past?

• Is this the expected behavior of the SIP stack?
• Is there a reason for not passing PAI?
• Is this a bug which will be fixed?

Anyone? Any reply?

08-08-2018, 04:13 PM
This state of affairs is completely incomprehensible.

It seems no Epygi personnel is monitoring, replying, or doing anything at all, in this forum lately.

One of the great features of recommending and working with Epygi devices was access to this forum.

Did Epygi's corporate culture shift?
Is management disapproving of this forum?

This post contains a well documented bug report regarding a current product, and no-one seems to care!