PDA

View Full Version : Quadro E1 to LG iPECS



Matt.C3Group
07-17-2011, 08:57 PM
Hi,
I am trying to config an LG Ericcson iPECS phone system to use a My Net Fone SIP20 service with the Epygi Quadro E1 gateway they have provided me.

I have confirmed the service between the epygi gateway and the MNF proxy is connecting via the Call Routing Tables feature (dialed in and was redirected out to a 3rd party no problem) but I am having issues with the E1 service between the Quadro E1 and the iPECS IP PBX. The LG primary rate gateway module is not detecting any kind of service connected?

I have downloaded a Tech Article titled "Configuring E1 settings for Quadro E1 devices" from the Australian inporter www.alloy.com.au to no avail. I have run through troubleshooting with My Net Fone (SIP provider), nothing.
All LG equipment is new out of the box and confirmed no hardware issues.

Has anyone had any experience with this combination of PBX/ hardware?

Thanks
Matt

KSComs
07-21-2011, 03:36 AM
Matt, have you set the ISDN for CPE / network mode ?

If you are in Melbourne I can be hired.