PDA

View Full Version : External MOH (Quadro M26xi)



nicolab@gracan.co.za
06-05-2011, 08:45 AM
Hi there,
im battling to get the External MOH to play through the Audio in port. Check the audio out on the laptop and it is working.
I have activated Audio on every Extension (under Basic services) is there anything else that needs to be activated?

KSComs
06-05-2011, 11:40 AM
Hi there,
im battling to get the External MOH to play through the Audio in port. Check the audio out on the laptop and it is working.
I have activated Audio on every Extension (under Basic services) is there anything else that needs to be activated?

Are you using a stereo or mono connector from your audio out to the Quadro input?

Audio port connections:
Line-in/Line-out (Line-in Signal Level-
0,5 V RMS, Line-out Load Resistance -
600 Ohm to 10K Ohm)

nicolab@gracan.co.za
06-10-2011, 09:19 AM
Hi Kevin, im using a stereo cable. just cannot seem to get it to work.

waphone
08-05-2011, 09:21 AM
I have the same problem with a 12Li I am using a mono cable i even forced Music on hold
but the radio would not play

Ashot
08-09-2011, 06:43 AM
Guys,

The Audio in/Audio out don't work in ISDN flavour units: 12Li and 26xi. Will be fixed in the next public SW version.

Sorry for inconvenience
Ashot