PDA

View Full Version : How to Configure international calling via Internet



IBIS_SOEN
11-04-2010, 02:27 PM
Hello,

We have a Epygi Quadro PBX which we now configured to make international calls via our phone company.

We just purchased a high internet bandwidth and would like to use the INTERNET to make international calls.

I don't know where to start (what to check and what to do). I don't even know how to check if this is possible and how to configure this.

Can anyone help me understand how calling via internet will work using the PBX?

Any response in this matter is very much appreciated.

Thank you and kind regards,
Soen

KSComs
11-04-2010, 09:56 PM
Hello,

We have a Epygi Quadro PBX which we now configured to make international calls via our phone company.

We just purchased a high internet bandwidth and would like to use the INTERNET to make international calls.

I don't know where to start (what to check and what to do). I don't even know how to check if this is possible and how to configure this.

Can anyone help me understand how calling via internet will work using the PBX?

Any response in this matter is very much appreciated.

Thank you and kind regards,
Soen

Soen, I would suggest to look at where your international calls are going to go to - main ones and look at either getting a Sip trunk from that location or look for Sip providers that are in your country. If there are none, then you might have a problem obtaining business services...

The Quadro is capable of many SIP trunk registrations, so it is possible to set up multiple trunks to other geographics that offer the cheapest routes.

Look for help on the Voip Carrier Wizard inside the Quadro.

Or under the telephony tab you will see a link to the same

Regards

Kevin