PDA

View Full Version : one way voice problem on voip



richard@edge2edge
05-15-2010, 02:23 AM
Hi
Boot loader: 4.1.35/ReleaseFirmware Version: 5.1.39
I am using 2X with 1 FXO and Voip using Vox (South Africa) DSL 512 only
I am able to connect using voip connection however caller can hear me but I cannot hear them (always)
15-May-2010 09:18:06 15 sec 214 07317*****@196.41.212.66:5060 RX Codec: G729a,TX Codec: , Quality: 1 (excellent)
I get this if i use snom 360 or siemens gigasetc470ip.

Very new !
Thanks

KSComs
05-15-2010, 02:40 AM
Hi
Boot loader: 4.1.35/ReleaseFirmware Version: 5.1.39
I am using 2X with 1 FXO and Voip using Vox (South Africa) DSL 512 only
I am able to connect using voip connection however caller can hear me but I cannot hear them (always)
15-May-2010 09:18:06 15 sec 214 07317*****@196.41.212.66:5060 RX Codec: G729a,TX Codec: , Quality: 1 (excellent)
I get this if i use snom 360 or siemens gigasetc470ip.

Very new !
Thanks

Hey there, welcome to the forums,

You state you have a DSL 512 service - is that shared between PC bandwidth as well as your ITSP ( Vox )?

If you run a speed test via http://www.speedtest.net (http://www.speedtest.net/) check to see what your upload/download speeds incase it isn't as good as it should be.

When you receive a call via the FXO is it good both ways ?

If you go to http://epygiip/generalconfig.cgi and tick the "Accept stray SIP requests" box and save, does that rectify your problem ?

Regards

Kevin

richard@edge2edge
05-15-2010, 06:10 AM
Thanks for the quick response
Yes I use dsl for both PC and Voip (not much PC traffic)
Ticked "Accept stray SIP requests" still the same
Speed test : Download 0.77 and 0.67 mb/s
Upload 0.14 and 0.13 mb/s
ping 420 and 370

dogcom
06-24-2010, 07:35 AM
Hey mate,
What sort of modem are you using?
Does it have a firewall?
You can try a "DMZ" to the Quadro's ip address if it does or set the modem into bridge mode and let the Quadro do your logging on.
Cheers