PDA

View Full Version : Quadro E1 and Ascom IP Dect



ptc
04-24-2010, 07:18 PM
I am trying to register ip dect phones to the Quadro and am not able to make them work.

I believe that in general to setup a new sip phone I go into the line settings of the extension, select other and enter a user name and password. I then go to the phone, point it to the ip address of the quadro, and give it the same user name and password (this is what i have done with 2*Pancode IP door stations)

One of the ascom ip base stations (IPBS) is set to master, and all of the phone registration details are set in that base station. The phones (d62) are talking to the base stations and to each other, but they show 'pbx out of service' on their display.

Any advice much appreciated.

Thank you.

hrant
04-25-2010, 02:16 AM
The title of your post says "Quadro E1" - is it Quadro E1 gateway? Take into account that only Quadro IP PBXs accept the IP phone registration.
If it is Quadro IP PBX model then check the SIP registration logs on Quadro. Do you see any registration messages received from the base station?

ptc
04-26-2010, 05:34 PM
This is what the log says:

From: <sip:admin@192.168.0.141>;tag=999501397584a4d8d-5f35-4cb8-b9b2-231e9601413c
CSeq: 893 INVITE
Call-ID: 9f7b1455-2ca7-41e5-acda-cc3c7ce421ff@quadroFXO.epygi-config.loc
Accept: text/x-epygi-ms
Contact: <sip:MasterAgent@192.168.0.254:5060>
Server: Epygi Quadro SIP User Agent/v5.1.31 (QUADROM-IPPBX)
Content-Length: 0

***************************** SIP message buffer end ******************************

08:11:24 Receive SIP message # (27/04/2010 22:11:24:286 GMT) # UDP # 510 bytes # buff size 1 # from: 192.168.0.141:5060 # to: 192.168.0.254:5060

***************************** SIP message buffer start *****************************
ACK sip:MasterAgent@192.168.0.254:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.0.141:5060;rport;branch=z9hG4bKEPSVBUSdb82 c2f7-c2e0-40a0-888b-bf27cdc85475
To: <sip:MasterAgent@192.168.0.254>;tag=1013578638543fd746-83e0-410e-ad78-9b2c36e964f4
From: <sip:admin@192.168.0.141>;tag=999501397584a4d8d-5f35-4cb8-b9b2-231e9601413c
CSeq: 893 ACK
Call-ID: 9f7b1455-2ca7-41e5-acda-cc3c7ce421ff@quadroFXO.epygi-config.loc
User-Agent: Epygi Quadro SIP User Agent/v5.1.13 (QUADRO-FXO)
Max-Forwards: 70
Content-Length: 0

***************************** SIP message buffer end ******************************

Max-Forwards: 70
Authorization: Digest realm="quadrom.epygi-config.loc",nonce="a3c27b8c6951bcd99bc292a845a34817",username="admin",uri="sip:MasterAgent@192.168.0.254:5060",opaque="1272406284",response="86ac3cd9a21d5ca6c14162b1a996f471"
Content-Length: 556

13***************************** SIP message buffer end ******************************

08:11:24 Try to send SIP message # (27/04/2010 22:11:24:230 GMT) # UDP # 359 bytes # buff size 1 # from: 192.168.0.254:5060 # to: 192.168.0.141:5060

***************************** SIP message buffer start *****************************
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.0.141:5060;rport=5060;branch=z9hG4bKEPSVBU S7293dffb-48ae-479d-accf-908f85badcd0
To: <sip:MasterAgent@192.168.0.254>
From: <sip:admin@192.168.0.141>;tag=999501397584a4d8d-5f35-4cb8-b9b2-231e9601413c
CSeq: 893 INVITE
Call-ID: 9f7b1455-2ca7-41e5-acda-cc3c7ce421ff@quadroFXO.epygi-config.loc
Content-Length: 0

***************************** SIP message buffer end ******************************

08:11:24 Try to send SIP message # (27/04/2010 22:11:24:252 GMT) # UDP # 539 bytes # buff size 0 # from: 192.168.0.254:5060 # to: 192.168.0.141:5060

***************************** SIP message buffer start *****************************
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.0.141:5060;rport=5060;branch=z9hG4bKEPSVBU S7293dffb-48ae-479d-accf-908f85badcd0
To: <sip:MasterAgent@192.168.0.254>;tag=1013578638543fd746-83e0-410e-ad78-9b2c36e964f4

Any ideas?

Thanks

ptc
04-26-2010, 05:39 PM
And this is the sip registration log:

CSeq: 228 REGISTER
Contact: <sip:226@192.168.0.241:2187;transport=UDP>;expires=120
Content-Length: 0
Expires: 120
Max-Forwards: 70
User-Agent: (Ascom IP-DECT Base Station/ [3.2.6/3.0.26/IPBS1-A3/4D])
Allow-Events: reg,dialog,message-summary

***************************** SIP message buffer end ******************************

08:37:37 Registrar # GetAORByName #user: 226, host 192.168.0.241 user count 0
08:37:37 Try to send SIP message # (27/04/2010 22:37:37:809 GMT) # UDP # 361 bytes # buff size 0 # from: 192.168.0.254:5060 # to: 192.168.0.241:2187

***************************** SIP message buffer start *****************************
SIP/2.0 404 No Such Line Configured
Via: SIP/2.0/UDP 192.168.0.241:2187;rport=2187;branch=z9hG4bK-F70FAD5F
To: <sip:226@192.168.0.254>
From: <sip:226@192.168.0.254>;epid=00013e01bed9;tag=2557692407
CSeq: 228 REGISTER
Call-ID: 66a07127e909d311abb700013e01bed9@192.168.0.241
Server: Epygi Quadro SIP User Agent/v5.1.31 (QUADROM-IPPBX)
Content-Length: 0

***************************** SIP message buffer end ******************************

ptc
04-26-2010, 05:53 PM
Seems to work better when I register with name not number -but syill showing pbx out of service

Allow-Events: dialog
X-Real-IP: 192.168.0.140
Authorization: Digest username="locext198",realm="quadrom.epygi-config.loc",nonce="7b84b3644d0cbb441677196b5373fe1b",uri="sip:192.168.0.254:5060",response="45ee18a12ba983d4a122573bc8ecf5bc",opaque="1272408536",algorithm=MD5
Expires: 3600
Content-Length: 0

***************************** SIP message buffer end ******************************

08:48:56 Registrar # GetAORByName #user: locext198, host 192.168.0.140 user count 1
08:48:56 Try to send SIP message # (27/04/2010 22:48:56:770 GMT) # UDP # 423 bytes # buff size 0 # from: 192.168.0.254:5060 # to: 192.168.0.140:1024

***************************** SIP message buffer start *****************************
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.0.140:1024;rport=1024;branch=z9hG4bK-y7wlrw316jdr
To: "Ext. 198" <sip:locext198@192.168.0.254:5060>
From: "Ext. 198" <sip:locext198@192.168.0.254:5060>;tag=ncz4kpbfkc
CSeq: 672 REGISTER
Call-ID: 3c267029323d-9plj2z8pd5ke
Contact: <sip:locext198@192.168.0.140:1024;transport=UDP>
Expires: 3600
Server: Epygi Quadro SIP User Agent/v5.1.31 (QUADROM-IPPBX)
Content-Length: 0

***************************** SIP message buffer end ******************************