PDA

View Full Version : Forward Incoming SIP calls to ISDN ports



cietech
06-10-2009, 04:53 AM
Hello everyone,

I am using a QuadroIDSN 5.0.26 with a Panasonic NCP500 PBX.

My Panasonic is connected via BRI ports to the Quadro ISDN ports. I am using SIP accounts on the Quadro to make and receive external calls.

I can successfully make calls but I can't receive. When I check the logs with telnet I see the SIP Invite Ack.... but no calls is "forwarded" to my ISDN ports. I have no extensions, i just want all the incoming calls to be forward to the ISDN ports.

In the Panasonic live logs... i see no traces on the BRI port. So i think the calls are "stuck" in the Quadro.

Do I need a special route?

I attached the call routing table.

Thanks for your help.

cietech
06-11-2009, 04:38 AM
My mistake....
an incoming route was missing + nating issues!

Regards,

KSComs
06-11-2009, 07:02 AM
;)

I was going to say where was that route... but thought better and let you rethink things....

Welcome to the Epygi forums....


Kevin