PDA

View Full Version : Quadro 16x rebooting and locking up.



paulk
08-12-2008, 05:11 AM
To whom it concerns,
I have a Quadro 16x on a customer site. In recent times I'm getting a sequence of alarms starting with ISDN lines un-usable and finally resulting in the device rebooting itself. This is causing my customer a lot of problems as you can imagine.

Below is the typical sequence:

Hello

This is an automatically generated notification mail from: camphillPBX

Application : ISDN
Event : Status Unusable
Priority : 3
Description : Link 0 is Unusable
************************************************** ************

Hello

This is an automatically generated notification mail from: camphillPBX

Application : ISDN
Event : Status Unusable
Priority : 3
Description : Link 1 is Unusable
************************************************** *************

Hello

This is an automatically generated notification mail from: camphillPBX

Application : ISDN
Event : Status Unusable
Priority : 3
Description : Link 2 is Unusable
************************************************** ***************

Hello

This is an automatically generated notification mail from: camphillPBX

Application : ISDN
Event : Status Usable
Priority : 1
Description : Link 0 is Usable
************************************************** ***************

Hello

This is an automatically generated notification mail from: camphillPBX

Application : ISDN
Event : Status Usable
Priority : 1
Description : Link 1 is Usable
************************************************** ***************

Hello

This is an automatically generated notification mail from: camphillPBX

Application : system
Event : reboot
Priority : 3
Description : the device has been successfully started after reboot
************************************************** ***************

Hello

This is an automatically generated notification mail from: camphillPBX

Application : DHCPServer
Event : Error
Priority : 3
Description : Ignoring packet from own device. Please check your cabling!
************************************************** ***************

Any suggestions? Is this a known issue?

Many thanks,

Paul

artur_s
08-13-2008, 06:10 AM
Hello Paul,

Regarding to ISDN Status Usable/Unusable events:
The other side works on sleep mode (passive mode) so
- You have to select "Passive Mode" selection from ISDN Advanced settings page. By default "Passive Mode" checkbox is selected.

Regarding to reboot:
- ISDN status Usable/Unusable cannot force Quadro to reboot itself.
Please open TSS case and attach systemlogs to find out the problem.

Thanks,
Artur