View Full Version : Troubleshooting and Problems

Pages : 1 2 3 4 [5]

  1. Many Extension Ringing MAX is 13 not 16
  2. Phone Access Password reset
  3. M8L Fax to email issue
  4. How to change quadro ip to another address ex. 192.168.1.x
  5. Total # of phones that can answer an incoming call....
  6. Remote extension cannot connect to Epygi. FailedAuthenticate on Linksys SPA942
  7. Incoming calls refused with message "420 Bad Extension"
  8. Quadro seems to object if server address changes between REGISTER and SIP dialogue
  9. Fax issues
  10. No voice heard from either person on the phone
  11. issue with picking up parked calls (gets disconected)
  12. how to auto reboot snom phones after provisioning without manual confirmation
  13. VPN only worked once
  14. Authorizatio failure then blocks my IP when on my local 3G network.
  15. Music on Hold
  16. Call drops after random time - no call end Details listed in Call Statistics
  17. NEW QX50 QX200 Upgrade or backup restore from 2X2 4x M8l M32X
  18. internal phone (on vpn) keeps getting added to IP blocked List
  19. "This account number is not valid"
  20. unable to pickup rining call on MER call after hanging up current call
  21. Quadro6L frequent packet loss - Navigating the web gui makes it worse?
  22. incoming call issues
  23. Forwarding from desk phone, IP connection cannot be established
  24. Remote user Traceroute Problem
  25. Intermittent dropped calls after 11 minutes 11 seconds
  26. Admin portal only home page available
  27. Corrupt voicemail files
  28. Call Hunting - Operation not following program.
  29. Yealink T22P not provisoning
  30. No spanish pack lenguage disponible
  31. wrong binding-IP-address using remote extension
  32. SNOM 760 Does not indicate when DND is on when using feature code
  33. TLS registration causes wrong binding-IP-address using remote extension
  34. modifying SIP Contact Header record
  35. Cisco SPA 509g soft key Call Forwarding all (cfwd) customization
  36. Inbound jitter on Quadro M12Li
  37. VDP is giving Voice message as ENTER THE PASSWORD AND PROCEED after pressing a button
  38. Changing Auto Attendant voice mail message
  39. External DTMF tones not recognized by AA
  40. Obtaining EPYGI custom SNMP data from a QuadroFXO
  41. PSTN loop and voice lag
  42. Intermittent dialing to Extensions as well as ISDN
  43. VoIP-GSM via Topex Gateway
  44. some cell phones will not ring phones
  45. [SIP] Invalid SDP from terminator
  46. Auto attendant problem
  47. Strange Nighttime Rings
  48. M8L FTP issue
  49. single phone codec issues
  50. WAN IP address change issues
  51. Quadro 4L Snom outgoing call issue - Temporarily not available
  52. Routing fxo calls to Elastix server
  53. unable to provision some snom320s
  54. Voicemail issue
  55. Forwarding a phone call through a sip account to an external line: no sound
  56. IP line extensions call quality
  57. web interface not working
  58. Quadro M26x All FXS connected phones suddenly dead
  59. Quadro12li Version 5.3.78
  60. Impossible to Enable Dynamic DNS on QX50 ver 6.1.50 - Password never read
  61. Problem PbX QUADRO and VoIP telephone Mitel/Aastra 6865
  62. remote extension configuration
  63. Trunk setup problems
  64. iQall App Not Working
  65. Phone calls to some numbers do not work
  66. No ringback tone when dialing a DID
  67. Internet speed
  68. Epygi QX50 1 way audio only over Peplink VPN, Want 2 Way
  69. Problems with Clouditalia
  70. Epygi QX50 1 way audio only over Peplink VPN, Want 2 Way
  71. Quadro2x hang
  72. Onboard fuse blown.
  73. Snom D375 replace D370
  74. Problem with implementation of Epygi
  75. Default Interference issue, Pick up group issue and transfer issue
  76. Default Problem with DHCPDECLINE
  77. Default Issue with QCC not getting system info from certain Epygi's
  78. Post Inbound jitter on Quadro M12Li!!
  79. External DTMF tones not recognized by AA!!
  80. Hunt Group - Initial extension not ringing
  81. Epygi QX50 1 way audio only over Peplink VPN, Want 2 Way