- Status connected but no voice
- i need 3 digits in ext
- Max. capacity of IP lines
- Set up remote extensions
- Multiple RE behind same NAT
- Quatro 2 setup
- SIP aware Routers
- Problems with Polycom 301
- DSL with dynamic IP
- What’s BEST - route incoming call
- Can I use Dynamic DNS on the Quadro
- epygi 2x & nexVortex
- Windows DHCP Server
- Remote Extension - SNom 360
- 4.1.18FX
- SNOM 320 as Reception
- snom firmware update on 4.1.18
- Pre-determined extension from another PBX
- lingo VOIP sip server name?
- Extensions don’t register on epygi.com
- Pattern configuration
- Intercom in User settings
- Plea for improved documentation
- IP PBX connecting to FX0 Gateway
- Voip Carrier Wizard
- Aastra Phones and paging group
- install FXO and FXS [ATA] adapters
- Caller ID from PSTN on 4X4
- Best Analogue phones
- Dysplay CALL FWD on Aastra 55i
- quadro 2x with aastra 35i ct
- Transfer config, voice, and data
- SIP on Quadro 2x
- M32 config for UK (BT) ISDN30
- Multiple Epygi in Network
- Quadro2x remote extension with port 5060 blocked?
- Linksys phones.
- Use Extension Settings doesnt work
- Which quadro device?
- 2xi analog lines
- autoprovisioning sip phones in 2x without dhcp on
- Caller ID drops leading 0
- Quadro PPPoA support? Recommend ADSL2+ modem for remote extensions
- Aastra 55i not registering voicemail
- Removing devices from IP Lines ?
- RTP Streaming Channels
- Total operating power requirement
- Version 5.18
- Snom meeting point
- BLF Implementation
- Quadro6L SLA Line Configuration
- quadro 16X 5.1.18
- QoS configuration in uplink wizard
- BLF and Load WOES
- remote softphone
- Call Routing
- DSCP-to-CoS Mapping
- Quadro6L subnet mask not taking /32
- SugarCRM and Quadro v5.1.19
- The PnP function of Quadro 2x
- Correct Network Configuration
- Install Fxo Gateway in 6L
- Firmware version 5.1.31
- Quadro 6L phones wont call each other internally
- permanently engaged tones
- MERg does and doesn't
- Anonymouse caller (and the AA)
- Nested Virtual Groups
- call forwarding method
- Memory Size for System messages
- unregistered/inaccessible call forward
- Exchange 2010 UM
- Line Sharing Group
- Differences with Quadro 2x & 6L
- Configuring my FXO
- How do you configure multiple Voip Carriers on a 2XI
- Firewall medium security filter allows only one IP
- What is the Ports I want to Forwarding To Quadro
- Extension Registration with SIP Server
- Profiles for voice mail settings.
- Callback woes.
- Manual Nat Traversal - sip.epygi.com
- Music on hold is heard when on ISDN call
- Initial Handset Configuration - Best Practice
- add 2nd FXO gateway
- Jitter using Cisco 5505 Firewall
- How to access quadro and set LinkSys VoipPHone
- Router firewall security settings
- Snom with CTI Integration
- Basic Router Features of the Quadro.
- EMS multiple playlist streaming capability?
- voicemail / call pick-up
- Problem with Virtual Extension (Paging Group)
- Quadro and ADSL
- New installation
- Reception SNOM 821
- Snom Automatic Firmware upgrade
- mails settings : unimplemented error
- I Can't Install 5.2.9 Software
- Where can I manually download firmware for quadro 2xi
- Adding IP Lines resets extension configuration for previously added lines
- Quadro 4x SASY-SOHO-0101-0100 latest firmware
- Unconditional Call Forward
- Quadro & PPPoA
- voicemail smtp locally wan side
- Snom m3 & Quadro 2x
- Quadro 2x + 8 snom M3 phones
- Remote firmware upgrade/install
- connecting Phones though the Wan
- SMR / Stats / billing
- 6L pppoe and allow large fragmented udp packets ?
- Call recording
- Msn Outgoing Number
- quadro Security
- Outgoing Call routing
- Polycom 650
- Yealink IP Phone provisioning
- Quadro M32x compatible with SIP with IAD termination?
- Correct Order-No. for Quadro 2x additional 8 IP-Phone-License
- New firmware for Quadro 4Li
- Newbie 6L questions
- SNOM 821 Firmware Virsion with Quadro6L
- Trouble configuring Auto Attendant
- Yealink T38G Auto Provisioning
- Quadro M8L Firmware upgrade
- DND - phone vs quadro
- Analogue handsets behave differently
- Licenses in a redundancy scenario with QX1000
- Display logo on Cisco 7960
- Routing call from IP PBX to Exchange 2010 UM User
- Extensions number plan
- Memory on board for the M8L
- Restore Configuration from 4X to 8ML
- Quadro2x2 + Yealink
- Configure FXO lines on Quadro 8ML and also create some Call Routing Table entries
- incoming call
- Simple Installation
- Configuring uadro4x with Bandwidth.com SIP Trunk
- two sites with failover
- Network Diagnostic Test Failed
- Multiple Quadros, Stacking?
- M8L Power Supply
- queu problem
- Local AAA Table No of records?
- Basic install
- QUADRO LCF Configuration Tool "LCF Maker" Quadro Programer
- Calls drop on attended transfert
- ISDN configuration and call routing table
- attach IP line to an extension
- static IP
- how to set up quadroFXO with elastix PBX
- basic setup callerid
- Epygi Media Streamer (EMS) with Windows Server 2012 Standard
- BLF on Snom 360 Phones
- Sip Expansion Licences for EOL product
- SNOM 710 in 2X / 2Xi
- yealink autoprovision dhcp option 67 setting
- Consultants in Japan
- Quadro 4x v5.1.39 does not have option to configure via wan port
- Register SIP Trunk with Quadro using Static Registration
- Configure SIP Ports for 2+ Remote IP Phones
- Quadro 6L latest available firmware
- ACD Agent DND Timeout
- Installation of Call Center
- Obsolete Cipher for HTTPS
- Restoring Quadro 6L backup to other Quadro Models like 4Li etc
- Quadro Q32X Clustering
- Default Problem with Virtual Extension (Paging Group)
- Epygi QX50 1 way audio only over Peplink VPN, Want 2 Way
- Epygi QX50 1 way audio only over Peplink VPN, Want 2 Way
- Which PBX to purchase for small/med enterprise
- Epygi QX50 1 way audio only over Peplink VPN, Want 2 Way
- Which PBX to purchase for small/med enterprise
- Restore Configuration from 4X to 8ML