- Support for Linksys SPA-941 IP-Phones
- Quadro behind PABX won?t disconnect
- Support for Grandstream GXP 2000
- grandstream budgettone 102
- VOIP/GSM Gateway
- Quadro interoperability with Definity ACD
- How to configure a Cisco 7970 IP Phone
- Quadro with video phones (AuPix AP-100)
- What is a Hub, Switch and a Router?
- Which Hubs/Switches can I use?
- DSL/Cable router behind the Quadro?
- Connect Quadro to a PBX instead of an CO?
- Siemens Compatibility
- Compatibility with Polycom 601
- aastra 9133i as remote ext
- 3G / Quadro
- Polycom SoundStation 4000 IP
- Mediatrix 1204 with Quadro 2x
- Astra 9116
- Budgetone 102
- Call transfer problem on Linksy SPA-941
- Polycom Sound Point 650 Phone
- Snom 320 Call forwarding
- server voice recorder
- Faxing Issues With ISDN Gateway
- Thomson ST2020 Call transfer
- Linksys SPA962 SIP Phone compatibility
- Support for Snom 370
- Linksys SPA962
- Using Paging Zone Controller
- Siemens Gigaset S450IP and C450IP Phones
- Security alert Aastra admin password
- SNOM 320 picking up second call from hold
- BLF on 4.1.33 version
- Ericsson F220m GSM Gateway
- Problems with Grandstream IP Phone
- Snom Ver 7.x Firmware
- Cisco 7941
- Issue with Snom 320 and 4x 4.1.50
- Cisco IP phones 7940
- Asterisks and quadro2x
- Switch and Router Recommendation
- phones
- Using Snom m3 DECT phone with Epygi Quadro 2x
- Snom and netgear autoconfig problem
- cisco 79xx
- Snom Phones Best version 7
- snom m3
- SPA2000 call transfer
- Remote 57iCT with 4.1.52
- Grandstream BudgetTone-200 not working
- Internal FXS Ports & a Modem
- cisco 7961 pickup group
- Epygi to Asterisk Calls dropping after -+ 1 min
- Interoperability and compatbility between Quadro, TORNADO and INNOMEDIA devices
- General LAN interop in corporate environment.
- SPA8000, SPA2102, t.38, Quadro extensions
- Firmware for Quadro 4xi
- How to use Aastra terminal without Epygi PBX
- Support for Atcom AT-530P
- Problem when calling other IP PBX
- Mediatrix 2102
- PolyCom IP 670
- Polycom SoundPoint IP 430 suppport
- Quadro with 2N VoiceBlue Lite GSM Gateway
- Polycom IP500
- list of tested ip phones
- No VM Alarm on the phones
- Nec-Philips AP200S DECT with Quadro?
- Speed dial on Polycom IP550
- quadro VPN feature and snom 370 firmware 7.3.7
- Audiocodes MP-114
- Grandstream gateways
- Epygi peering to a Grandstream GXE pbx ?
- BroadView / MetaSwitch experience?
- Aastra 9133i
- how to connect polycom 330 to
- Polycom Architecture - 9/2009
- best video phone
- Tainet Venus 2804
- Polycom Soundpoint 501 as remote phone
- how to factory reset quadro?
- Issue with Kirk (Polycom) WS300 and handsets
- Legacy PBX and PSTN - E1 - Integration
- How to configure S450Ip on 2xi
- Grandstream GXP2000 line buttons re-assignment
- What is the correct "Type" for a Polycom 301
- Aastra - Phonesupport
- Support of Wideband-Codec G.722
- List of Compatible phones with Epygi
- Wall ringtone
- Siemens Gigaset C470 IP Phones on Epygi 4X4
- Snom or Polycom ?
- Polycom incoming Caller ID shows IP Address
- Polycom handsets reset volume after each call
- Setting up a Polycom Provisioning Server
- Telephone and Accessories Specific Information
- Cisco SPA50x
- Gransstream 2010/2020?
- snom 3xx version 8.4.18 + Epygi 5.2.9
- Has anyone tested the snom m9 with a quadro?
- VPN between draytek and quadro
- SIP traffic with Microsoft OCS R2
- Calls not going via VPN
- Yealink Remote Phonebook
- Setup A580IP Gigaset on Quadro2x
- Yealink DND /Autoprovision Issue
- snom Auto Dial function
- Siemens C475 IP phone registration failed!
- Mitel IP Phones and Epygi
- Yealink handsets and blind transfer
- SMR/ACD Functionality
- Quadro E1/T1 with SipFoundry sipXecs
- Siemens Gigaset A580IP on Quadro 2x Transfer Issues.
- Snom Phones Not Registering on 16X
- Grandstream GXV3000 Compatibility
- security service provider in orissa
- Snom 821 no attende call transfer
- Cisco 79xx BLF Keys
- Overhead paging systems
- Aastra 6737i
- DP715/DP710 - VoIP DECT Phone
- GXV3500 Interoperability
- aastra Phones Rebooting without notices
- dect gigaset n520 ip pro
- Support for Aastra 6735 & 6737
- Compatibility with cisco phone
- asterisk with tls and srtp
- Snom 710 support?
- Aastra 630D DECT
- Nortel Meridian 1 PRI not working
- Does Quadro 2x work with Lync?
- Static on Snom Phones and Epygi 4x4 when silence during calls after Firmware Upgrade
- Yealink W52P
- Snom PA-1 with Valcom V2003-A Paging System
- Can only partially provision polycom ip331
- Yealink W52P
- QXISDN4 with IPBX other than epigy
- Snom 760 for M8L Firmware Update
- Qx200
- New Yealink S series
- IP phones compatibility and Call Interception
- Polycom incoming Caller ID shows IP Address!!!
- best video phone!!!!
- Yealink W52P - how to set up two extensions to same wireless base station?
- Looking for help